Wooden Door Price List in the U.S.: Cost, Prices, and Budget Ranges 2026
Homeowners commonly pay for wooden doors ranging from interior hollow-core options to solid exterior doors. The price depends on door type, size, material grade, hardware, and installation complexity. This guide outlines typical costs, per-door pricing, and how to control the final bill for a wooden door project.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Interior hollow-core wooden door | $40 | $85 | $150 | Lightweight, basic hardware |
| Interior solid-wood door | $180 | $350 | $700 | Higher quality wood, better finish |
| Exterior solid-wood door (prehung) | $350 | $700 | $1,400 | Weatherstripping and performance options vary |
| Prehung vs slab price delta | $75 | $150 | $300 | Prehung includes frame and hinges |
| Hardware package (knobs, hinges, strike) | $25 | $70 | $250 | Quality hinges affect operation |
What buyers usually pay for wooden doors
In typical U.S. projects, the total price for a single wooden door ranges from $60 to $1,400 depending on type and finish. The average interior hollow-core door runs about $60-$120 for a basic slab, while a solid-wood interior door tends to fall in the $180-$350 range. Exterior solid-wood doors, with weather sealing and a prehung frame, commonly run $350-$1,400. Assumptions: standard 80-inch door height, standard 2-1/8 inch thickness, midrange hardware, and normal access to the job site.
Typical per-unit data helps buyers budget: interior hollow-core about $60-$120, interior solid-wood $180-$350, exterior solid-wood $350-$700, plus $75-$150 for a basic prehung setup. Timing and region can shift these ranges by 10-25%.
Major cost components in a wooden door price quote
Most quotes break into four to six line items including materials, labor, hardware, and potential permits. A compact breakdown shows Materials, Labor, Hardware, and Prehung Frame as the core drivers. The table below uses representative ranges for a standard interior 32-inch door in a midwestern market.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (door slab or panel) | $40 | $120 | $320 | Depends on solid vs hollow core, veneer, and species |
| Labor (installation) | $60 | $110 | $250 | Includes hinge alignment and trimming |
| Hardware kit | $25 | $70 | $180 | Includes knob/lever, latch, strike plate |
| Prehung frame and weatherstripping | $80 | $150 | $350 | Exterior doors often require weatherseal packages |
| Finishing (paint or stain) | $20 | $60 | $120 | Solid-wood doors may require multiple coats |
How material type drives the cost per door
Material selection is the dominant cost driver for wooden doors. Hollow-core interior doors cost the least, while solid-wood exterior doors command the highest price. Veneered doors offer a middle ground, balancing cost and appearance. For a standard 32-inch door, hollow-core prices typically sit around $40-$120, while solid-wood can range from $180-$700 depending on wood species (pine vs oak vs mahogany) and finish. Veneered options generally cost $120-$320. Assumptions: standard sizing, typical finishes, and common regional wood availability.
Regional price differences across the United States
Prices vary by region due to labor rates, material costs, and access. In the Northeast and West Coast, expect higher labor and finish costs, potentially adding 10-20% to midrange quotes. The Midwest and Southeast often show lower install rates, with a smaller premium for exterior doors. A representative interior solid-wood door in the Northeast might be $240-$450, while the same door in the Midwest could be $180-$380. Exterior solid-wood doors show a similar regional spread, with weatherstripping and glazing increasing the delta.
Size, frame, and installation scope that affect price
Door size and frame type influence price by a noticeable margin. A standard 32-inch door with a basic frame is cheaper than a 36-inch unit or a door with a heavier jamb, sidelights, or transom windows. An 8-foot tall entry door adds costs for tall-frame hardware and taller prehung options. If you replace only a slab and reuse the existing frame, expect a $20-$100 reduction versus full prehung installation. Expect labor to scale with trim, reveal, and finish work required by the project scope.
Premium features and hardware that push the price higher
Hardware quality and design significantly affect the total price. Brass or satin-nickel hinges, multipoint locks, and decorative panels add to the bill. Optional features like internal insulation, security glazing, or impact-resistant cores further raise costs. A basic interior door with standard hardware might stay at $60-$120, but a solid-wood exterior door with multipoint hardware and weatherstripping can exceed $1,000 per unit in high-end packages.
Common add-ons and their impact on the total
Few buyers realize that add-ons can double the price in some cases. Finishes (gel stain vs laminate), glazing (clear, frosted, or decorative), soundproofing cores, and specialized weather seals add dollars. Delivery/installation scheduling, disposal of old doors, or retrofitting hinges increase the final price. A typical interior project may add $20-$100 for disposal and cleanup, while exterior upgrades could add $100-$300 for weather barriers and sealants.
Ways to trim costs without sacrificing function
Practical adjustments keep price predictable. Choose hollow-core interior doors for budget projects, reuse an existing frame if feasible, or select veneers over solid wood for lower material costs. Opting for standard sizes avoids custom machining charges. If you need exterior doors, consider a standard prehung unit with basic hardware rather than premium multipoint systems. Scheduling during off-peak seasons or bundling multiple door replacements can reduce labor overhead.
Three real-world quote scenarios to compare
Concrete examples help buyers evaluate quotes and avoid overpaying. Scenario A: Interior hollow-core slab, 32-inch, standard hardware, same-location install — Materials $40, Labor $60, Hardware $25, Total $125. Scenario B: Interior solid-wood prehung, 32-inch with basic finish, standard hinges — Materials $180, Labor $110, Hardware $70, Frame $150, Total $510. Scenario C: Exterior solid-wood prehung, 36-inch, weatherstripping, glazing, premium hardware — Materials $650, Labor $200, Hardware $180, Frame $250, Finishing $120, Total $1,400. Assumptions: standard height, average daily crew, midrange materials, normal site access.
Maintenance and longer-term cost considerations
Ownership costs extend beyond the initial price. Solid-wood doors may require periodic refinishing every 5-7 years, while hollow-core entries typically need less maintenance. Exterior doors include weather sealing that can reduce drafts and energy costs but may incur seasonal maintenance. Budget a maintenance reserve of about 5-10% of the door’s initial price over five years for refinishing, hardware replacement, and sealant upkeep.
Pricing table by door type and scope
| Door Type | Size (in) | Material | Installed Price Range | Per-Unit Notes |
|---|---|---|---|---|
| Interior hollow-core slab | 30-32 x 78 | Wood Veneer / Engineered | $40-$120 | Basic hardware, no frame |
| Interior solid-wood slab | 30-32 x 78 | Solid Wood | $180-$350 | Finish varies by species |
| Interior solid-wood prehung | 30-32 x 78 | Solid Wood | $260-$700 | Includes frame and hinges |
| Exterior solid-wood prehung | 36 x 80 | Hardwood | $350-$1,400 | Weatherstripping included |