Wilsonart Laminate Countertops Cost and Price Guide 2026
Buyers typically pay for Wilsonart laminate countertops based on material costs, edge profiles, square footage, and installation time. The main cost drivers are sheet count, edge detailing, sink cutouts, and labor. cost and price figures below reflect U.S. market ranges.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (Laminate) per sq ft | $2.00 | $3.50 | $5.50 | Wilsonart laminate sheets; thickness 0.04–0.08 in. |
| Labor & Installation per sq ft | $12.00 | $22.00 | $35.00 | Removal, preparation, and finish |
| Edge Treatments (per linear ft) | $5.00 | $12.00 | $20.00 | Eased, full wrap, or bullnose edges |
| Sink Cutouts (each) | $25.00 | $60.00 | $120.00 | Standard or large/heavier sinks |
| Overhead/Accessories (trim, backsplashes) | $15.00 | $40.00 | $80.00 | Backsplash height varies |
| Total Installed Range (30–40 sq ft) | $1,200 | $2,200 | $3,000 | Assumes standard edge and 30–40 sq ft area |
Assumptions: region, specs, labor hours.
Overview Of Costs
Typical price range for installed Wilsonart laminate countertops spans a broad band: material costs per square foot are modest, while installation adds a sizable portion. A realistic installed range for a standard 30–40 square foot kitchen is about $1,200–$3,000, with mid-range projects around $2,000–$2,500. data-formula=”labor_hours × hourly_rate”>
Per-unit considerations include $/sq ft for laminate, $/linear ft for edges, and $/sink cutout. For example, a 10 ft run with a bullnose edge may add $120–$200 in edge costs and $60–$100 for a sink cutout).
Cost Breakdown
| Category | Low | Average | High | Typical Driver | Notes |
|---|---|---|---|---|---|
| Materials | $2.00 | $3.50 | $5.50 | Laminate sheet price | 0.04–0.08 in thick Wilsonart sheet |
| Labor | $12.00 | $22.00 | $35.00 | Labor hours, crew size | Cutting, routing, seam work |
| Edges | $5.00 | $12.00 | $20.00 | Edge profile, length | Eased, square, bullnose |
| Sink Cutouts | $25.00 | $60.00 | $120.00 | Number and type | Under-mount vs top-mill sinks |
| Backsplash/Trim | $15.00 | $40.00 | $80.00 | Backsplash height | Standard or tall |
| Delivery/Handling | $0.00 | $15.00 | $40.00 | Delivery distance | Local shop to home |
Factors That Affect Price
Material choice (classic Wilsonart patterns vs. newer textures) drops in at the lower end, while specialty finishes or textured patterns push costs higher. Assumptions: standard kitchen with mid-range pattern.
Install complexity includes sink type, plumbing clearance, and corner transitions. Complex cuts or multiple sink configurations add hours and edge work. data-formula=”hours × rate”>
Edge profile edge choices vary by cost: standard square edges are cheaper than bullnose or full wrap, affecting per-foot pricing. Assumptions: single 10 ft run, one sink.
Ways To Save
Choose standard edges to reduce per-foot costs and avoid custom profiles. Assumptions: standard 10 ft run in one area.
Plan a straightforward layout with minimal seams and fewer sink cutouts to cut installation time. Assumptions: straightforward L-shaped countertop.
Shop local distributors for volume discounts on Wilsonart sheets and match with a qualified installer to minimize waste. Assumptions: mid-size city market.
Regional Price Differences
Prices vary by region due to labor rates, transport, and local demand. In the Northeast, installed totals may run 5–12% higher than the national average; the Midwest often sits near the average; the Southwest can be 3–8% lower when yards and installers compete.
Urban vs. Suburban vs. Rural differences can shift costs by about ±10% depending on access to skilled installers and material sourcing. Assumptions: 24–40 sq ft renovations.
Labor, Hours & Rates
Labor costs reflect crew size and time. A typical laminate project for a standard kitchen uses 6–12 hours of labor, depending on seams, edge work, and sink cutouts. data-formula=”labor_hours × hourly_rate”>
Average rates commonly range $22–$40 per hour for professional installers in many U.S. markets, with premium shops charging more for complex layouts. Assumptions: single countertop run, 10–20 ft total length.
Real-World Pricing Examples
Basic scenario: 30 sq ft, standard edge, 1 sink cutout. Materials $60–$105; Labor $360–$660; Edges $50–$100; Total $1,200–$1,900.
Mid-Range scenario: 35 sq ft, eased edge, 2 sink cutouts, mid-range pattern. Materials $100–$180; Labor $600–$900; Edges $100–$180; Back splash/trim $40–$80; Total $1,920–$2,900.
Premium scenario: 40 sq ft, bullnose edge, large pattern, 2 sinks, extra-wide backsplash. Materials $180–$240; Labor $800–$1,200; Edges $180–$320; Back splash/trim $60–$120; Total $2,000–$3,900.