Treated Pine Price List: Practical U.S. Pricing for Lumber Buyers 2026

Treated pine price list details typical costs buyers encounter in the U.S. for common pressure-treated pine lumber. Price drivers include size, treatment level, and regional delivery. This article outlines realistic low, average, and high ranges and shows how pricing breaks down per unit and per project scope.

Assumptions: Midwest labor rates, standard pressure-treatment method, commonly used grades and dimensions, typical delivery distance.

Item	Low	Average	High	Notes
Treated Pine 2×4 (8 ft)	$2.50	$3.50	$5.00	Common framing size; price varies by region
Treated Pine 2×6 (12 ft)	$6.00	$8.50	$12.00	Decking/railing use; grade impacts cost
Treated Pine 4×4 (8 ft)	$7.50	$10.00	$14.00	Post or support applications
Treated Pine Decking Board (5/4×6, 8 ft)	$8.50	$12.00	$17.00	Higher grade, moisture treatment costs
Tooled Pine Lumber Bundle (1,000 bd ft, regional)	$1,100	$1,600	$2,100	Bulk discount applies with quantity

Treated Pine Lumber Price Range by Size and Grade

Typical total price for small jobs is driven by size, quantity, and treatment level. For basic framing, 2x4s in 8 ft lengths commonly run from $2.50 to $5.00 per piece, with average around $3.50. Deck-grade boards such as 5/4×6 at 8 ft cost roughly $12 to $17 each, depending on grade and supplier. Across a mid-sized project using 2x6s at 12 ft, expect $8.50 to $12.00 per board, with the average around $9.50. Assumptions include standard C-grade lumber, common northern or southern species, and standard pressure-treatment process.

Per-unit pricing and project-sized discounts often apply. Bulk orders or customer loyalty programs can lower unit costs when ordering 1,000 board feet or more. The example bundle price above shows how a larger purchase can shift the unit cost from the retail level toward the wholesale range.

Cost Components for Size-Based Pricing

• Materials: lumber length, width, thickness, and grade.
• Delivery: distance, access constraints, and fuel surcharges.
• Waste/Returns: cutoffs, knot density, and plan adjustments.
• Finish: type of preservative, staining, or sealing requirements if optional.

A complete quote breaks into four to six primary cost blocks. The table below shows typical ranges and what each represents. Prices are USD and reflect common U.S. market conditions for residential construction and remodeling projects.

Cost Component	Low	Average	High	What Drives It
Materials	$2.50–$5.00 per 2×4 (8 ft)	$3.50–$8.50 per 2×6 (12 ft)	$12–$17 per deck board	Size, grade, treatment level
Labor	$1.50–$2.50 per piece installation	$2.50–$5.50 per piece	$6–$10 per piece for complex cuts	Site access, install speed, waste handling
Delivery/Delivery Charge	$50–$150	$150–$350	$400–$900	Distance, curbside vs. inside delivery
Waste/Removal	$0	$0–$50	$100–$250	Offcut disposal or return fees
Permits/Inspections	$0	$0–$50	$300–$1,000	Regional code requirements
Warranty/Service	$0–$20	$0–$60	$100–$200	Limited coverage or extended options

Assumptions: standard delivery within 20–40 miles, no expedited service, typical deck or framing scope.

Size and grade are the two most influential variables in quotes. For example, increasing board length from 8 ft to 12 ft can raise material costs by 40%–60% per piece if the same quantity is used. Regional pricing differences add another 10%–25% variance due to supply and labor markets. A mid-range project using 2×6 boards for framing or decking will see price shifts from the lower end to the average range when quantity increases. Additionally, higher treatment levels (e.g., preservative systems with longer service life) push costs up by 15%–30% over standard treatment.

Concrete examples of scale and region

• Region: Southeast markets often show slightly higher delivery fees due to distance from mills, adding 5%–15% to total.
• Scope: Decking project using 250 linear feet of 5/4×6 boards at average grade sees material costs around $4,000–$6,500 before labor.

Control scope and timing to cut costs without compromising safety. Consider planning one delivery window to minimize multiple trips, batching board purchases to reduce waste, and selecting standard sizes (avoid rare lengths) to lower cut waste. If possible, choose pressure-treatment level that meets actual needs rather than premium treatments. For smaller jobs, mix-and-match sizes to fit framing plans can reduce overage.

• Bundle purchases with a single supplier to lock in slightly better per-unit rates.
• Prefer standard dimensions (8 ft or 10 ft) over uncommon lengths to minimize waste.
• Delay nonessential add-ons like fancy sealers or specialized finishes to a future project phase.

Pricing per linear foot or per board foot helps compare bids across regions. A standard 2×4 at 8 ft is typically valued around $2.50–$5.00 each, while per foot pricing for decking boards is often quoted as $1.50–$2.50 per linear foot depending on grade and thickness. Regional differences may shift these ranges by up to 20% based on local sawmill access, tariffs, and delivery costs. Consider requesting bids that show per-unit breakdowns to compare apples-to-apples.

Regional snapshot notes: Northern markets may have slightly higher sawmill costs, while Gulf Coast areas can show lower raw wood costs but higher delivery surcharges due to distance from mills.

Three real-world-style quotes illustrate how scope changes pricing. The examples assume residential framing and deck projects with standard 2×4 and 5/4×6 lumber in common grades.

Quote Scenario	Materials	Labor	Delivery	Other	Total
Small framing job (150 linear ft 2×4)	$450–$900	$300–$600	$60–$120	$0–$80	$810–$1,700
Medium deck build (350 ft of 5/4×6)	$2,600–$4,000	$1,200–$2,200	$120–$250	$50–$150	$3,970–$6,600
Bulk purchase for whole-project framing (1,000 bd ft)	$3,200–$6,000	$2,000–$3,500	$300–$800	$0–$200	$5,500–$10,500

Assumptions: standard residential materials, mid-range treatment, average regional delivery distance.

Prices can shift by region due to supply chain and labor markets. The same 2×6 (12 ft) board might sit in the $8.50–$12.00 range in one state but stretch to $10.50–$15.00 in another. The deck board market often sees smaller regional deltas than framing lumber, but distance to mills increases delivery costs. For budgeting, add 5%–15% for remote regions and 0–5% for near-mill markets when comparing bids.

• Near-mill regions: typically lower per-board pricing but higher domestic freight charges.
• Coastal states: modest premium on lumber due to logistics, with variable delivery windows.
• Interior regions: steady prices with occasional spikes during peak construction seasons.