Tennis Court Fence Cost: Price Ranges for Materials, Labor, and Accessory Additions 2026

Tennis court fence cost varies by material, height, gate needs, and site conditions. This article breaks down typical price ranges in USD, with exact figures to help buyers budget for fencing around a standard doubles court. The cost drivers include length of fencing, panel type, and local labor rates.

Assumptions: Midwest labor rates, standard chain-link or welded wire with 10 ft height, level ground, and no decorative coatings beyond basic galvanized finish.

Tennis Court Fence Cost by Material and Height

Material choice drives the majority of the cost. For a 10-foot tall boundary, welded wire panel systems run roughly $18-$45 per linear foot, while chain-link options typically land in the $15-$38 per linear foot range. Aluminum or steel panels with powder-coating add roughly 20-40% to the base material price. Labor to install tends to follow local wage rates and can add 40-60% on top of material costs.

Estimating price starts with the total linear footage of the fence, plus post spacing and panel length. A typical 10 ft panel with a 1 ft post overlap reduces assembly time but increases material count. For a 100 ft court, expect 10 panels of 10 ft each, plus 6-8 posts on each side depending on gate locations. Concrete footings are usually required every 8-10 ft. Regional soil conditions may raise footing depth and cost.

Labor costs cover crew hours, equipment use, and site prep. Realistic ranges for a standard 100 ft court are $3,000-$5,000 for installed fencing, with professional installation typically $30-$60 per hour per worker. A small crew (2-3 workers) can complete a basic 100 ft install in 1-2 days.

Welded wire offers rigidity and privacy at mid-range prices, $25-$50 per linear ft including posts. Chain-link fencing is usually the most economical, around $15-$38 per linear ft installed, with vinyl-coated variants climbing to $40-$70 per linear ft. Aluminum fencing provides a maintenance-light option at $40-$75 per linear ft but commands a higher upfront cost. Material choice affects durability and long-term maintenance.

Prices vary by region due to labor markets and logistics. Northeast installations often run 5-15% higher than the national average, while parts of the Midwest may be near the average. The Southwest can be lower on labor but higher on materials depending on supplier proximity. Assumptions: suburban markets, standard 10 ft height, no special coatings.

Gates add complexity and cost. A single gate usually adds $600-$1,400 in materials and installation, with double gates $1,200-$2,800. Corner posts and additional bracing can push footing expenses to $50-$140 per post. Concrete work is a frequent driver of higher costs in uneven lots or difficult access.

Longer warranties and tougher finishes push price by 5-20% but reduce future maintenance costs. Powder-coated aluminum tends to offer the best corrosion resistance with mid-range pricing, while galvanised steel requires more upkeep but remains cheaper upfront. Warranty usually covers materials and workmanship for 5-15 years.

Consider combining fence panels with existing structures, selecting standard 8-10 ft panels instead of custom heights, and consolidating gate needs to minimize hardware costs. Scheduling during off-peak seasons can save labor time and booking fees. Bundling removal, soil prep, and fencing into a single contract reduces admin costs.

Cost Component	Low	Average	High	Notes
Materials (per linear ft)	$15	$34	$70	Chain link to aluminum options
Labor (per hour, crew of 2-3)	$40	$55	$75	Regional variation applies
Gates and hardware	$600	$1,400	$3,000	Single vs double gate
Concrete footings (per post)	$50	$90	$140	Depth and soil drive cost
Permits and inspections	$0	$400	$1,200	Local code impact
Removal/landscaping prep	$200	$800	$2,000	Site cleanup