Teak Wood Door Cost: Price Ranges, Sizes, and Installation 2026

The cost of a teak wood door varies by size, finish, and installation scope. This article breaks down typical price ranges in USD and highlights the main drivers behind a teak door quote, including material grade, door type (solid, hollow core, or prehung), and labor needs. The first 100 words address how price is shaped by size, hardware, and site conditions.

Item	Low	Average	High	Notes
Teak door slab (3/4″ solid, standard 80″ tall)	$400	$750	$1,200	Raw material varies with grade
Prehung door unit (frame, hinges, weatherstripping)	$800	$1,400	$2,400	Labor-intensive, includes install
Finish and sealant (oil, varnish, or epoxy)	$60	$180	$350	Finish quality affects durability
Hardware (knob/lockset, strike plate)	$40	$120	$250	Solid brass or premium options higher
Labor for installation	$150	$450	$900	Per door, varies by site access
Delivery/handling	$20	$60	$150	Distance and stairs affect cost

Cost Breakdown for Teak Wood Doors by Size and Configuration

Typical total price spans from $1,000 to $3,200 for a complete teak door project depending on door slab versus prehung configuration, height, and width. Assumptions: standard 80″ tall, 2-1/4″ thick, mid-range teak, interior use, normal access, regional labor rates.

Teak door slabs sit between $400 and $1,200 for standard sizes. A prehung unit with a frame, hinges, and weatherstripping raises the range to roughly $1,000–$2,400. Per-unit pricing helps buyers compare options such as a premium solid door versus a more economical veneer or engineered teak product.

Material and Finish Costs for Teak Doors

Material choice drives the bulk of your teak door price. Solid teak doors command higher costs than veneer-backed or engineered options, and premium grain or darker tones add to the bill. Expect a finished surface between $60 and $350 per door for high-quality finishes.

Teak grade influences price: select/engineered teak often costs less upfront than full solid stock. A typical 3/4″ slab finished in satin polyurethane runs in the $120–$280 range, while a labor-intensive hand-rubbed oil finish can push the finish portion to $300–$450.

Labor and Installation Fees for Teak Doors

Labor rates vary by region and access to the doorway. In-shop finishing lowers on-site labor, but most installations for teak doors range from $150 to $900 per door depending on prehung needs, alignment, and weatherproofing work.

Installation cost components include measuring, ripping, hinge alignment, weatherstripping, and trim work. When a door is to be installed in an exterior wall, waterproofing and threshold work can add $100–$350 to the project.

Hardware, Finish, and Accessories Add-Ons

Hardware selections significantly affect total cost. A premium lockset, corrosion-resistant hinges, and decorative trim can add $60–$250 or more beyond the door price.

Plan for weatherstripping, thresholds, and sealants as separate line items. A complete hardware package with a high-end lock and handle can push total hardware costs to $200–$400 per door, depending on finish and security features.

Regional Price Variations in the United States

Location shifts price due to labor markets and material availability. In the Southeast, a teak door project may land toward the lower end of the range; the Northeast and West Coast typically see higher labor and delivery costs, sometimes up to 20–40% more for the same door.

Delivery charges scale with distance; rural areas may have limited stock, affecting turnaround time and price. A regional delta of roughly 10–25% is common between low-cost regions and major urban markets.

Common Variables That Shift the Teak Door Quote

Two numeric drivers often decide the final price. First, door height and width greatly influence material waste and hinge placement: every extra inch in height or width adds cost. Second, whether the door is solid teak or veneer-backed changes both material and shipping costs; solid stock may add 20–60% over veneer options.

Other factors include the chosen finish (oil vs. conversion varnish), site access, and whether special weatherproofing is required for exterior doors. A door with tall sidelites or a transom will push the price higher due to extra framing work and hardware.

Ways to Cut Teak Door Costs Without Compromising Quality

Controlling scope can reduce total price without sacrificing durability. Consider selecting standard dimensions, opting for a prehung unit only when necessary, or choosing a veneer-backed teak door for interior use.

Bundle delivery and installation dates, avoid custom milling on-site, and compare quotes that include hardware and finish in a single line item. If feasible, plan for mid-grade finishes rather than premium hand-finishing, and use stock hinges that fit standard door widths to lower labor time.

Quote Scenario Examples and Per-Unit Comparisons

Realistic quotes illustrate how size, finish, and installation scope change cost. A typical interior 32″ x 80″ solid teak door, prefinished with standard hardware, might run $1,000–$1,600 installed. A larger exterior 36″ x 84″ solid teak door with premium hardware and oil finish could range $1,800–$3,200 installed, depending on regional labor and weatherproofing needs.

For buyers comparing options, a 2-door package with matching interiors generally adds 5–15% in total cost versus individual doors due to shared delivery and labor setup. A mid-range finish and hardware set balances durability and cost nicely.

Assumptions and Quick Reference Pricing Table

Scenario	Door Slab	Prehung Unit	Exterior Door with Accessories	Interior Door with Hardware
Standard 32″ x 80″ solid teak	$400–$900	$1,000–$1,500	$1,600–$2,800	$750–$1,300
Premium finish (oil) and brass hardware	$100–$180	$120–$260	$200–$420	$60–$120
Regional delivery included (urban)	$0–$20	$50–$120	$100–$200	$0–$40

Assumptions: Midwest labor rates, standard teak, normal door openings, ordinary weather exposure.