Strut Mount Replacement Cost Guide 2026
Prices for strut mount replacement vary by vehicle, region, and labor. The main cost drivers are parts quality, labor time, and whether multiple mounts or related components must be replaced.
Assumptions: U S market, standard mid trim vehicle, front axle replacement, after 2025 parts pricing.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Parts (each strut mount) | $40 | $90 | $180 | Includes bearing plate and insulators; higher if OEM or specialized units |
| Labor (per axle) | $120 | $260 | $420 | Time varies by car design and access |
| Labor time (hours) | 1.5 | 3.0 | 4.5 | Includes removal and reassembly |
| Parts delivery/fees | $0 | $15 | $60 | Depends on supplier |
| Alignment after replacement | $60 | $100 | $150 | Typically recommended |
| Total per axle (parts + labor + alignment) | $220 | $470 | $810 | Assumes front axle replacement only |
| Two axles (both front or both rear) | $440 | $940 | $1,620 | Discounts may apply for bundled service |
Overview Of Costs
Typical price range for a strut mount replacement per axle is $220-$810, including parts, labor, and alignment. The low end reflects customer-supplied parts or simple mounts, while the high end covers OEM or specialty mounts and longer labor times. Some vehicles require additional components such as bearing plates, bump stops, or related bushings, which increases total cost.
Cost Breakdown
The following table shows how the price components usually stack up for a single axle replacement. Different vehicles can shift amounts, especially for performance or luxury models.
| Component | Typical Cost Range | Notes |
|---|---|---|
| Materials | $40-$180 | Strut mount assembly varies by OEM vs aftermarket |
| Labor | $120-$420 | Depend on access and complexity |
| Equipment | $0-$40 | Basic tools; special tools may add cost |
| Permits & Fees | $0-$10 | Rarely charged separately |
| Delivery/Disposal | $0-$60 | Packaging or disposal for old parts |
| Warranty | $0-$50 | Labor or parts warranty may apply |
| Taxes | $0-$60 | Depending on state and itemized bill |
Factors That Affect Price
Vehicle design and access drive costs because some strut mounts are harder to reach or require extra components. Common drivers include the mount type (standard vs heavy-duty), bearing quality, and whether an alignment is needed after replacement. SEER and tonnage metrics do not apply here, but vehicle weight class and high-performance suspensions may raise both parts and labor.
Ways To Save
Consider these strategies to reduce overall cost without compromising safety.
- Choose aftermarket parts that meet or exceed OEM specs to balance price and reliability.
- Bundle front and rear or multiple components where service is already planned to gain per-visit discounts.
- Request only necessary additional parts; some vehicles require extra bushings or plates that raise costs.
- Shop local shops with transparent pricing and verify any included alignment coverage.
Regional Price Differences
Prices vary by region due to labor rates and regional supply chains. In major urban areas, expect prices toward the upper end of the ranges, while rural areas tend to be lower. Midwestern markets often fall near the national average, with small regional variations.
Labor & Installation Time
Labor time commonly ranges from 1.5 to 4.5 hours per axle. Complex suspensions or models with limited access can push time higher. Effective hourly rates vary by shop and region, influencing total costs accordingly.
Real World Pricing Examples
Three scenario cards illustrate typical quotes you might receive. Each scenario includes specs, labor hours, per-unit costs, and totals.
Basic scenario — Vehicle with standard front strut mounts, aftermarket parts, and no additional components. Specs: front axle, 1.5 hours labor, parts $60, alignment $75. Total: about $260-$320.
Mid-Range scenario — OEM-equivalent mounts, front axle, one extra bushing, alignment included. Specs: 2.8 hours labor, parts $110, alignment $100. Total: about $470-$540.
Premium scenario — OEM mounts, bearing plates, plus rear mount inspection, alignment included. Specs: 4 hours labor, parts $150, extra parts $60, tax. Total: about $720-$810.
Additional & Hidden Costs
Some shops may add surcharges for diagnostic time, core charges for old parts, or disposal fees for worn components. Always confirm what is included in the quoted price and whether a follow-up alignment is required after the job.
Price By Region
Regional deltas can be ±10-25% from national ranges. For example, Urban West Coast markets tend to be higher, while Rural South regions may sit near the low end. Labor rates largely drive these differences.
FAQ Pricing
Q: Is it cheaper to replace both mounts at once? A: Yes, many shops offer a bundled price when multiple components are done in the same visit.
Q: Should I use OEM or aftermarket parts? A: OEM parts ensure exact fit but can cost more; reputable aftermarket parts offer good value and warranty options.