Stockade Fence Panels Price: Cost, Size, and Material Ranges 2026
Understanding cost drivers helps budget accurately for a stockade fence project.
Prices shown reflect common U.S. market ranges in 2026 dollars and assume standard residential installation with existing gate openings and typical soil conditions. The numbers below cover per-panel costs, per-foot estimates, and common add-ons that affect the final bill.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Stockade panel (pine, raw) | $20 | $28 | $40 | 6 ft wide |
| Stockade panel (pressure-treated) | $25 | $38 | $60 | Enhanced durability |
| Stockade panel (red cedar) | $40 | $55 | $85 | Natural resistance, premium |
| Standard gate panel | $60 | $95 | $150 | Typically 3-4 ft wide |
| Labor to install per panel | $15 | $25 | $45 | Assumes basic post alignment |
| Post concrete per post | $6 | $12 | $20 | Includes bags and mix |
| Hardware kit per panel | $5 | $9 | $15 | Hinges, latches, screws |
Assumptions: Midwest labor rates, standard 6 ft panels, normal access, ground conditions.
Typical Price Per Panel by Material
Raw pine stockade panels start around $20-$28 per panel, rising to $40-$60 for pressure-treated or premium cedar options. Weather-ready materials with treatment or cedar often justify higher per-panel costs.
For most yards, size and material determine the bulk of the price: a 6 ft pine panel averages $28, while a 6 ft pressure-treated panel averages around $38-$45. Cedar panels run $55-$85 for 6 ft. Per-foot estimates align with these ranges for long runs.
Common Sizes and Their Cost Impact
6 ft panels are the standard for residential fences, 8 ft panels reduce the number of posts needed but raise per-panel price. A 6 ft pine panel typically costs $20-$40, while an 8 ft pine panel runs about $25-$50. Size choice influences both material and labor when planning a full run.
Smaller 5 ft panels exist but are less common in stockade designs. For 6×6 ft sections, expect higher per-foot costs due to increased post labor and corrosion resistance requirements.
Regional Variations in Stockade Panel Price
Coastal regions and the Mountain West show variability of roughly 10-20% above national averages for materials and labor. A 6 ft pressure-treated panel may cost $34-$48 in one region vs $38-$60 in another. Regional supply chains and contractor availability drive the spread.
Urban markets often add delivery surcharges or minimum-order fees, while rural areas may have lower labor rates but longer travel times.
Labor and Project Scope: Installation Costs
Labor to install stockade panels typically runs $15-$45 per panel, including setting posts, aligning panels, and basic fastening. A full 100 ft run could incur $1,500-$3,000 in labor for standard crews. Labor hours scale with fence height, terrain, and post spacing.
Per-foot labor ranges $8-$25 in many regions, depending on crew size and access. Concrete work for posts adds $6-$20 per post, depending on mix and local prices.
Additional Costs to Consider
Post materials, caps, and concrete mix add to the base panel price. Hardware kits ($5-$15 per panel) and gate hardware add $60-$200 per gate. Delivery fees and disposal of old fencing can affect the final total.
Bulk Purchases and Bundled Quotes
Buying panels in bulk can yield 5-15% savings versus single-panel purchases. Contractors may offer bundled pricing for materials, posts, and labor. Compare quotes with a consistent scope to find best-value bundles.
Replace, Don’t Rebuild: Scope Consequences on Costs
Replacing a complete run with stockade panels costs more upfront but reduces ongoing maintenance compared to cheaper alternatives. A full 100 ft replacement might run $1,800-$4,500 in materials plus $1,500-$3,000 in labor, depending on materials and site conditions. Evaluation of existing posts and line distance matters for total cost.
Cost-Saving Tactics Without Compromising Safety
Opt for standard 6 ft panels and pressure-treated pine when possible to keep costs down. Use existing posts if they’re sound, and schedule work during mild weather to avoid delays. Strategic prep and modest scope can reduce total expense.
Price-Estimate Summary Table by Scenario
| Scenario | Low Range | Average Range | High Range | Notes |
|---|---|---|---|---|
| 6 ft pine panel run, DIY installation | $1,200 | $2,100 | $3,000 | Panels, hardware, minimal labor |
| 6 ft pressure-treated run, contractor install | $2,500 | $4,000 | $6,000 | Materials plus labor |
| 8 ft cedar panel run, contractor install | $3,400 | $5,800 | $9,000 | Premium material and labor |
| Full 100 ft run with posts and gate | $2,000 | $4,500 | $8,000 | Includes posts, caps, concrete |