Span Panel Cost Guide 2026
Typical costs for a Span panel include the panel itself, labor for installation, and any required permits or upgrades. The price depends on amperage, enclosure type, and whether it’s a new install or a replacement. Cost estimates below reflect U.S. pricing in USD and assume standard indoor installation.
Assumptions: region, specs, labor hours.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Panel Price | $300 | $600 | $1,200 | Span panel with 100–125A typical residential use |
| Labor | $400 | $900 | $1,800 | Electrical contractor, 6–10 hours |
| Permits & Inspections | $100 | $250 | $600 | Local permit fees vary by municipality |
| Electrical Materials | $150 | $350 | $800 | Breakers, wiring, connectors |
| Delivery/Disposal | $20 | $60 | $150 | Delivery to site; scrap disposal |
| Wiring & Accessories | $50 | $150 | $350 | Conduit, adaptors, labeling |
| Warranty & Miscellaneous | $20 | $60 | $150 | Limited warranty coverage |
Overview Of Costs
Typical price range for a Span panel project spans from roughly $870 to $3,600. The total depends on panel amperage (100–200A), whether a service upgrade is required, and the complexity of the panel replacement. Assumptions: residential settings, indoor installation, standard 3–4 circuits added or replaced.
Cost Breakdown
Below is a detailed itemized view. Prices include both parts and labor where applicable.
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $150 | $350 | $800 | Panel, breakers, cabling |
| Labor | $400 | $900 | $1,800 | Certified electrician; 6–10 hours |
| Equipment | $0 | $60 | $200 | Tools, testers, temporary supports |
| Permits | $100 | $250 | $600 | Local permit/inspection |
| Delivery/Disposal | $20 | $60 | $150 | Site delivery; old panel disposal |
| Accessories | $50 | $150 | $350 | Labeling, fittings |
| Warranty | $20 | $60 | $150 | Service warranty on work |
| Overhead | $0 | $40 | $120 | Company overhead |
| Taxes | $0 | $40 | $120 | Sales tax varies by state |
What Drives Price
Key price determinants include panel amperage, service upgrade needs, and installation complexity. A 100A panel with standard aging wires is cheaper than a 200A panel requiring service entrance upgrades, new conduit, or relocation. Assumptions: single-story residence, no fire-stop work, no trenching.
Ways To Save
Budget-minded buyers can consider modest options that reduce upfront costs. Ask about combined permit fees or bundled labor quotes. Consolidating multiple electrical tasks can lower per-project overhead and reduce trips to the site.
Regional Price Differences
Prices vary by location due to labor rates and permit costs. Urban areas generally have higher totals than suburban or rural settings. Northern regions may incur different utility requirements than the Sun Belt, impacting materials and inspections. Assumptions: typical single-family home, standard scope.
Labor, Hours & Rates
Labor is a major portion of the total. Average crews charge between $75–$125 per hour depending on region and certification level. A straightforward 100A panel replacement often falls in the lower end, while a 200A upgrade with code changes can push costs up. Assumptions: 6–10 labor hours; municipal permitting applies.
Extra Costs To Expect
Some projects incur surprises. Surge protection, updated grounding, or panel relocation can add $200–$800+ to totals. If a service entrance upgrade is needed (to handle 200A or higher), plan for additional hardware and labor. Assumptions: no major indoor renovations beyond panel work.
Real-World Pricing Examples
-
Basic: 100A Span panel replacement in a single-story home; components and simple labor.
- Spec: 100A panel, standard enclosure, minor wiring changes.
- Labor: 6 hours; Per-unit: $/hour included in labor.
- Total: $870–$1,400
-
Mid-Range: 125–150A panel with modest upgrade and new breakers.
- Spec: 125–150A, some rewiring, permit included.
- Labor: 8–12 hours; Materials: higher-cost breakers.
- Total: $1,200–$2,300
-
Premium: 200A service upgrade, relocation, full panel replacement, and enhanced grounding.
- Spec: 200A, new service entrance, relocation work.
- Labor: 12–20 hours; Permits and upgrades included.
- Total: $2,600–$4,900
Price At A Glance
Span panel projects commonly range from under $1,000 up to about $5,000. The distribution hinges on amperage, service upgrades, and regional labor markets. Assumptions: standard residential installation, indoor panel, typical warranty.