Six Yards of Concrete Cost: Price Range, Components, and Savings 2026

Prices for six cubic yards of concrete typically reflect the mix, delivery distance, and site access. The cost to pour 6 yards often falls in a practical range that builders use to budget projects. This article breaks down the price drivers and provides exact ranges in USD, including per-yard and per-hour metrics where relevant.

Assumptions: standard 4,000 PSI concrete, Midwest labor rates, normal access, pour in one lot, basic formwork, no specialty additives.

Item Low Average High Notes
Six cubic yards concrete $460 $700 $1,000 Delivered ready-mix
Delivery charge $100 $250 $350 Per delivery window
extra concrete pump (optional) $40 $75 $120 Per cubic yard if used
Labor for placement $150 $350 $700 Includes screeding and finishing
Formwork and reinforcement $150 $350 $620 Wood forms, rebar as needed

Final total for 6 cubic yards typically ranges from roughly $860 to $2,070 depending on region, access, and finish requirements.

Six Yard Concrete Batch: Typical Price Range

For a standard 6-yard pour, buyers should expect a total cost in the range of $860-$2,000. The lower end covers basic delivery and a simple slab without extra features; the upper end accounts for complex forms, higher-strength mixes, and restricted access sites. Cost sensitivity is highest around delivery distance and finish type.

Major Cost Components For 6 Cubic Yards

The quote typically splits into four to six elements. The price tag for six yards hinges on material, delivery, labor, and site prep.

Materials Labor Delivery Equipment Permits Other
$460-$600 $150-$350 $100-$250 $40-$120 $0-$50 $0-$50

Material Costs: Cement, Aggregates, And Water

Material components drive the base price. A typical mix costs about $70-$140 per yard when averaged across standard mixes, totaling roughly $420-$840 for six yards. Expect higher costs with specialty blends or recycled aggregates.

Delivery And Ready-Mix Fees By Region

Delivery charges vary by region and distance. In suburban markets, expect $100-$200 per load; in rural areas or long-haul deliveries, costs can reach $300 or more. Assumptions: single trip, standard 4,000 psi mix, no split loads.

Labor And Finishing For A Six-Yard Pour

Labor covers crew time from placement to final finish. Typical labor ranges are $150-$350 for smaller slabs, with larger or more complex finishes rising to $500-$700. Finishing tasks include screeding, floating, edging, and brooming as requested. Labor rates reflect regional wage differences and crew size.

Regional Variations In Concrete Pricing

Prices differ by market, with coastal cities often higher due to transportation and demand. In the Southeast, six yards may sit near $900-$1,600, while the Midwest might be closer to $850-$1,800. Regional factors strongly influence the final quote.

Key Variables That Drive The Final Quote

Ultimate price hinges on slab size, finish, and access. Two high-impact drivers:

  • Slab area and depth: thicker slabs or larger areas amplify material and labor.
  • Access and formwork: difficult access or complex forms add time and material costs.

Numeric thresholds: area > 500 sq ft or depth > 4 inches can shift pricing bands by 10-25%.

Practical Ways To Reduce The Six-Yard Concrete Cost

Smart budgeting focuses on scope control and timing. Consider batching a single 6-yard pour, choosing standard finish, and avoiding premium additives. Lock in a clear scope and compare multiple quotes to avoid surprise charges.

Cost Reduction Tactics Potential Impact Notes
Limit finishes (basic trowel finish) -$100 to -$300 Fewer labor hours
Consolidate deliveries -$50 to -$150 One delivery window preferred
Simple forms, fewer rebates -$80 to -$200 Standard lumber and no rebar extras
Regional quotes Varies Compare three local suppliers

Per-Yard And Per-Hour Pricing Snapshot

Per-yard figures help compare quotes easily. A typical ready-mix price spans $70-$140 per yard, with delivery and labor adding on top. If labor is charged hourly, expect about $75-$125 per hour for crew time on site. Formwork and reinforcement run separately, depending on project scope.

Similar Posts