Shower Doors on Tub Cost Guide 2026
This guide examines the cost to install shower doors on a tub, including price ranges, common price drivers, and tips to budget effectively. Homeowners typically pay based on door type, glass thickness, and installation complexity.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Doors & Glass | $300 | $800 | $1,600 | Frameless or framed; standard 1/4″–3/8″ tempered glass |
| Hardware & Tracks | $80 | $220 | $400 | Handles, hinges, rollers, seals |
| Installation Labor | $200 | $500 | $1,000 | Labor hours vary with door type |
| Permits & Codes | $0 | $100 | $300 | Depends on jurisdiction and new plumbing/rewiring |
| Delivery/Disposal | $20 | $50 | $150 | Courier vs. truck delivery |
| Warranties & Extras | $0 | $60 | $200 | Labor warranty, sealant, caulk |
Overview Of Costs
Typical cost range for installing shower doors on a tub runs from about $520 to $2,450, depending on door style and job complexity. Per-unit pricing often appears as $300–$1,000 for doors plus $50–$150 per foot of track and $0–$200 for hardware. Assumptions: standard tub-widths, 1/4″–3/8″ tempered glass, local labor rates.
Cost Breakdown
The breakdown below shows typical drivers and how they affect totals. Frameless doors generally cost more than framed options due to hardware and glass quality.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $320 | $900 | $1,700 | Glass, frames, seals, color options |
| Labor | $200 | $500 | $1,000 | Removal of old setup, alignment, sealant |
| Permits | $0 | $100 | $300 | Local requirement varies |
| Delivery | $20 | $50 | $150 | Glass and hardware transport |
| Accessories & Warranties | $0 | $80 | $220 | Caulk, trim, extended warranty |
What Drives Price
Door type and glass thickness are primary cost levers. Frameless doors with 3/8″ or 1/2″ glass command higher prices than framed options or 1/4″ glass. Installation complexity matters when tub surrounds have irregular walls, alcoves, or existing tile that needs protection or cutting.
Regional Price Differences
Prices vary by market. In urban areas, expect higher labor rates, while rural regions may lower labor costs but raise delivery charges. Regional deltas can be +10% to +35% compared with national averages, often driven by glass suppliers and permit fees.
Labor, Hours & Rates
Typical installation spans 2–6 hours for a standard tub with a single door or a simple two-door setup. data-formula=”labor_hours × hourly_rate”> Labor rates commonly range from $40 to $120 per hour depending on region and contractor experience. For a straightforward job, plan around 3–4 hours of labor at mid-range rates.
Regional Price Differences
Three benchmark regions illustrate typical deltas. Northeast urban areas tend to be the highest, the Midwest middle, and the South often the most affordable. Expect roughly +/-20% differences between these regions for materials and labor combined.
Additional & Hidden Costs
Potential extras include specialty hardware, corner guards, niche finishes, or a need to replace sealants or re-tile surrounding areas. Hidden costs can appear if tub edge trim is damaged or if the existing enclosure requires extensive prep work.
Real-World Pricing Examples
Three scenario cards provide context for common projects:
- Basic — single framed door, standard tub width, 1/4″ glass, no custom work: Doors $300, Hardware $80, Labor $200, Permits $0; Total $580. Assumptions: standard wall surfaces, quick sealant cure.
- Mid-Range — framed doors with 1/4″ glass, mid-range hardware, moderate labor: Doors $650, Hardware $180, Labor $450, Permits $100; Total $1,380. Assumptions: minor wall prep, standard tub width.
- Premium — frameless doors, 3/8″ glass, premium hardware, complex install: Doors $1,100, Hardware $260, Labor $900, Permits $300, Delivery $80; Total $2,640. Assumptions: custom enclosure, tile protection, extended warranty.
Assumptions: region, specs, labor hours.