Revolving Door Price List: Typical Costs, Sizes, and Install Pricing 2026

buyers often pay for revolving doors based on leaf count, size, materials, and installation complexity. This price list covers common options in the U.S., with clear low-average-high ranges and per-unit figures to help plan a budget. The focus is on cost, price, and estimate accuracy for standard commercial entries.

Assumptions: standard 8-ft tall entrance, aluminum or stainless steel leaves, glass panels, basic frame, no custom architectural work, midwestern labor rates.

Item Low Average High Notes
Revolving door unit (4-leaf, 8 ft tall) $8,000 $11,000 $14,500 Includes frame and glass
4-leaf unit (8 ft tall) per additional leaf $2,000 $2,700 $3,500 Each leaf added to existing unit
Installation labor $2,000 $4,000 $6,000 Typical commercial site
Electrical/mechanical integration $600 $1,400 $2,800 Motor, sensors, interlock
Delivery/rigging $400 $1,200 $2,000 Site access dependent
Permits and inspections $100 $700 $2,000 Local code requirements

Direct price breakdown for a typical 4-leaf revolving door

For a standard 8 ft tall, 4-leaf unit in a mid-size city, total installed price usually ranges from $14,000 to $22,000, with a common midpoint around $17,500. The main drivers are leaf count, glass type, finish, and whether the unit includes a built-in motor and safety features.

Component Low Average High Notes
Door unit (frame + 4 leaves) $8,000 $11,000 $14,500 Standard aluminum or stainless steel
Glass panels $2,000 $3,000 $4,500 Tempered or laminated
Motorized drive system $600 $1,400 $2,800 Optional for energy efficiency
Labor & wiring $2,000 $4,000 $6,000 Install and calibration
Delivery/installation access $400 $1,200 $2,000 Site constraints apply
Permits $100 $700 $2,000

Key variables that swing the Revolving Door price

Leaf count and system type are the top cost drivers. A 4-leaf unit costs less than a 6-leaf model, while a motorized, sensor-equipped variant adds several thousand dollars. Regional labor rates and access constraints can push total price by 15-25%.

  • Leaf count: 4 vs 6 leaves changes unit price by roughly $2,000–$4,000.
  • Glass and finish: clear or decorative glass and corrosion-resistant finishes add $1,000–$4,000.
  • Drive system: manual rotation vs motorized with safety sensors affects both upfront and ongoing maintenance.
  • Site access: restricted entry, stairs, or narrow corridors can require special rigging and increase delivery/installation costs.

Regional price differences for revolving doors

Prices vary by region due to labor, permitting, and freight. Coastal markets tend to be 10-20% higher than inland regions, with metropolitan areas near major suppliers showing the highest variability. A midwest price example often lands near the national average for standard configurations.

Region Low Average High Notes
Midwest urban $12,000 $17,000 $23,000 Moderate labor, standard materials
West Coast $13,500 $19,000 $26,000 Higher permits and labor
South $11,000 $15,500 $20,000 Lower labor on average
Northeast $12,500 $18,500 $25,000 Dense urban siting, access issues

Labor and installation costs by leaf count and system type

Labor ranges from $2,000 to $6,000 for installation, rising with size and complexity. A manual 4-leaf unit in an easy-access doorway will be at the lower end, while a motorized 6-leaf system with integration into building controls pushes to the higher end.

  • 4-leaf, manual: typically $2,000–$3,500
  • 4-leaf, motorized & sensors: $3,000–$6,000
  • 6-leaf, manual: $3,500–$5,500
  • 6-leaf, motorized: $5,000–$8,000

Upgrade options that impact price and value

Smart sensors, energy-efficient glazing, and enhanced safety features raise the upfront cost but may lower long-term operating expenses. Options include programmable automatic braking, night-mode sensors, anti-collision detection, and high-security glass. Each addition generally adds $800–$2,500 per feature depending on integration complexity.

Upgrade Low Average High Notes
Smart sensor package $900 $1,500 $2,400 Door position and obstacle sensing
Anti-vandal glass $1,000 $1,800 $2,600 Enhanced security glazing
Energy-efficient glazing $800 $1,400 $2,200 Low-e or laminated coatings
Integrated access control $1,500 $2,400 $3,800 Door readers, interlock

Budgeting when replacing an existing revolving door

Replacement often costs more than new installation because removal, disposal, and potential structural adjustments are required. Expect additional labor of $1,000–$3,000 for teardown and site repair, plus possible permit amendments if the opening is reconfigured.

  • Old unit removal: $800–$1,800
  • Disposal or recycling: $200–$1,000
  • Opening reinforcement: $1,000–$2,500

Maintenance, warranty, and pricing longevity

Annual maintenance can add $200–$600 per year depending on components. Warranties typically cover mechanical parts for 1–2 years and glass for 5–10 years, with extended coverage available at a premium.

Maintenance task Annual cost Notes
Lubrication and calibration $120–$350 Annual or per interval
Glass inspection and seal check $60–$150 Inline with service visits
Motorized drive service $60–$200 Includes parts if necessary

Similar Posts