Ready Mix Concrete Delivered Price Across Volumes and Regions 2026
Prices for ready mix concrete delivered to a jobsite vary by volume, concrete strength, and regional delivery costs. This article breaks down typical price ranges, the main drivers, and practical ways to compare quotes. The focus is on concrete delivered pricing, including per-cubic-yard rates and delivery fees.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Delivered price per cubic yard | $110 | $135 | $170 | Includes basic mix and standard delivery |
| Delivery fee (flat or distance-based) | $50 | $110 | $300 | Depends on distance and access |
| Minimum order requirement | 1 yd³ | 2 yd³ | 5 yd³+ | Smaller jobs may have higher per-yard cost |
| Strength option (C25/30, etc.) | $0–$10/yd³ extra | $0–$20/yd³ extra | $25–$40/yd³ extra | Higher strength costs more cement |
| Additives or fiber reinforcement | $5–$12/yd³ | $8–$18/yd³ | $20–$40/yd³ | Used for specialty pours |
Assumptions: Midwest-to-South regions, standard 3000–4000 psi mix, normal traffic access, standard mixer trucks.
Typical Delivered Price Range by Concrete Volume
Prices usually fall in a broad band when volume grows. For a standard 3000 psi ready mix, customers commonly pay around $110–$170 per cubic yard, with delivery fees ranging from $50 to $300 depending on distance, access, and surge in demand. Larger orders often secure lower per-yard rates, but total costs rise with total volume. A typical single pour of 6–10 cubic yards might land around $900–$1,800 before tax and disposal.
Material and Delivery Price Breakdown
Understanding where the price comes from helps in evaluating quotes. Most quotes separate material cost from the delivery surcharge. The Materials share covers cement, aggregate, water, and any specialty additives. The Delivery/Service share accounts for truck time, fuel, driver labor, and access constraints. A concise breakdown table is shown below.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (per yd³) | $90 | $115 | $150 | Includes cement, sand, aggregate |
| Delivery/Service | $40 | $90 | $180 | Fixed or distance-based |
| Taxes/Permits | $0 | $6 | $20 | Depends on jurisdiction |
| Minimum charge | $60 | $90 | $120 | Some suppliers apply minimum |
Assumptions: One pour at a standard jobsite, no specialty admixtures beyond basic water-reducing agents.
Regional Variations You Should Expect
Delivery costs and per-yard pricing shift with region, climate, and local competition. In coastal regions with higher labor and fuel costs, expect higher ranges; inland regions with multiple suppliers may see lower averages. A typical regional delta can be 5–20% between markets. Region-based pricing is a major lever in overall cost.
Size, Strength, and Mix Type Impact on Price
The mix design drives both material cost and pumping requirements. For example, a standard 3000 psi mix is cheaper per yd³ than a 4000 or 5000 psi mix, which adds cementing and special aggregates. A colored or decorative finish adds further cost per yd³. For pours under 4 yd³, the smallest orders can carry a surcharge. Concrete strength and finish type are the most influential price drivers.
Seasonal Shifts and Scheduling Impacts on Quotes
Weather and demand cycles affect availability and pricing. Peak construction seasons and tight delivery windows can raise both material and delivery costs by 5–15%. At short-notice pours, expect higher surge or rush fees that may push totals above typical averages.
Ways to Cut Costs Without Compromising Strength
Smart planning helps control price without reducing concrete quality. Consider batching to match pour timing, coordinating with other trades, and combining multiple small pours into a single delivery. Choosing standard gray concrete over specialty colors and avoiding fiber reinforcement for simple slabs can save several dollars per yd³. Coordinated scheduling and standard mixes trim total cost.
Example Quotes by Region and Volume
Here are illustrative scenarios to aid comparison. Figures show delivered price per yd³ and a total project guess for typical pours.
- Region A, 6 yd³, standard 3000 psi: $120–$140/yd³; total $720–$840; delivery $50–$90
- Region B, 12 yd³, 3500 psi with additives: $125–$150/yd³; total $1500–$1800; delivery $70–$150
- Region C, 20 yd³, 4000 psi, decorative finish: $140–$170/yd³; total $2800–$3400; delivery $120–$300
Assumptions: standard pour widths, typical site access, no specialized color or fiber.