Range Hood Installation Cost: What U.S. Buyers Should Expect 2026
Understanding the cost of range hood installation helps homeowners budget accurately. The final price mainly hinges on hood type, ductwork needs, and local labor rates. This article presents typical cost ranges in USD, plus concrete factors that push prices up or down.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed range hood (mid-range model) | $300 | $700 | $1,200 | Includes basic mounting and wiring reroute if needed |
| Inline ducting and vent length (per foot) | $6 | $12 | $25 | Rigid duct adds cost vs. flexible |
| Professional labor (per hour) | $75 | $100 | $150 | Rates vary by region |
| Electrical work (outlet/box, wiring) | $150 | $350 | $600 | Permits may add to the total |
| Permits and inspections | $0 | $150 | $500 | Depends on local code |
| New cabinet modification | $100 | $400 | $1,000 | May be required for some models |
Assumptions: Midwest labor rates, standard 6- to 8-inch ducting, standard 30-inch wide cabinet, and normal access to kitchen cabinets.
Price Range by Hood Type and Ducting Needs
Costs vary significantly with hood type and whether ductwork is needed. A basic under-cabinet, ductless hood is typically the least expensive to install, while a professional external vent with rigid ducting and high-capacity blower drives the high end of the price band.
Low range examples target retrofit projects with a plug-in model and no new cabinet work. Average reflects standard ducted installation with 6″ to 8″ duct paths. High values cover multi-room venting, wide cabinet modifications, or premium 600 CFM to 900 CFM units.
Typical price anchors by hood category
- Under-cabinet, ductless: $300-$700 installed
- Under-cabinet, ducted: $600-$1,200 installed
- High-CFM professional systems with cabinet/duct enhancements: $1,500-$2,500
Assumptions: standard ceiling height, typical home wiring, and single-vent path.
Breakdown of Major Cost Components
The quote usually splits into five key parts: materials, labor, equipment, permits, and delivery or disposal. Understanding each helps buyers identify savings opportunities and avoid surprise charges at the end of the project.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $150 | $350 | $900 | Included range hood and mounting hardware |
| Labor | $100 | $350 | $1,000 | Per-hour framing, wiring, and mounting |
| Electrical/Permits | $50 | $200 | $350 | Electrical box, circuit check, permit fees where required |
| Ducting and Venting | $60 | $250 | $450 | Rigid duct vs. flexible, length matters |
| Delivery/Disposal | $10 | $40 | $150 | Packaging plus haul-away of old unit if needed |
| Cabinet Modifications | $0 | $150 | $600 | Cutting or panel reshaping if required |
Key Variables That Change the Final Quote
Size and airflow drive price more than most buyers expect. A 300 CFM hood costs less to install than a 900 CFM model with additional ducting, firestop, and motor isolation components.
Other impactful factors include ceiling height, cabinet accessibility, and existing wiring. For example, switching from a ducted to a ductless unit can reduce the scope, but may trade off performance.
- Unit size and CFM: Larger ranges with higher airflow typically require bigger duct paths and more robust electrical work.
- Distance to vent exterior: Longer runs may need additional fittings and higher-grade duct.
Labor Time, Crew Size, and Scheduling Effects
Labor costs scale with crew size and job duration. An experienced two-person crew may complete a straightforward install in 4–6 hours, while complex retrofits can exceed 12 hours with multiple trips for materials.
Regional wage differences also shift the hour-rate, with metropolitan areas tending toward the higher end of the spectrum.
Regional Variations in Installation Pricing
Geography matters for supply, labor, and permit costs. Coastal cities often show higher rates than rural markets, while regions with strict electrical codes may add inspection fees or required upgrades.
Expect a broader price band in areas with high demand or limited skilled labor, and a tighter band where competition is intense.
Common Add-Ons That Change the Final Price
Extras such as cabinet trimming, backsplash cutting, or a new outlet can add to the total. Some homes require roof or exterior wall access to vent, which increases labor and material costs.
- Electrical upgrades or GFCI protection
- Additional surface mounting or trim kits
- Old vent removal or asbestos checks in older homes
Strategies to Trim Costs Without Sacrificing Safety
Careful scope control can keep costs predictable. Choose a ducted unit with a straightforward run when possible, reuse existing wiring if compliant, and avoid premium accessories unless necessary for performance or building codes.
Get multiple quotes, verify permit requirements, and ask about a bundled price that includes disposal of the old unit.
Size, Duct Type, and Job Scope as Price Levers
Per-foot duct costs and duct type materially shift the bill. Rigid metal duct tends to be pricier but reduces noise and improves efficiency compared with flexible duct.
Scope choices, such as island installations or ceiling-height adjustments, add labor and materials quickly.