Quartz Worktop Price Per Metre: Realistic Costs for U.S. Buyers 2026
Prices for quartz worktops are driven by material quality, fabrication complexity, edge profiles, and regional labor rates. This article breaks down the cost per metre in practical ranges to help buyers budget accurately for a quartz countertop project.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Quartz slab material (per metre) | $180 | $350 | $520 | Material grade and thickness vary |
| Fabrication & installation (per metre) | $250 | $420 | $690 | Cutting, edge shaping, fitting |
| Total installed price (per metre) | $430 | $770 | $1,210 | Sum of material + fabrication |
| Typical edge profile upgrade | $40 | $120 | $250 | Eased, bullnose, or ogee add cost |
| Delivery & waste disposal | $20 | $60 | $120 | Distance and local fees apply |
Assumptions: Midwest labor rates, standard 2 cm or 3 cm slabs, typical kitchen layout, standard edge profiles, low-rise installation.
Quartz Worktop Material Cost Per Metre
Material cost per metre is the largest variable and depends on quartz brand, thickness, and finish. Low-cost options in the $180-$260 per metre range use basic engineered quartz with standard patterns. Mid-grade slabs hover around $260-$420 per metre, with premium materials reaching $450-$520 per metre for high-clarity or premium resin blends. Material quality affects both appearance and durability, so buyers should weigh warranty terms and stain resistance when comparing per-metre pricing.
Fabrication and Installation Per Metre
Labor and fabrication typically account for about half of the installed price per metre. Standard cuts, sink holes, and simple edge profiles run about $250-$420 per metre. More complex layouts, radius edges, or multiple sink cutouts push costs toward $500-$690 per metre. Scheduling and access (basement access, limited working space) can introduce small adders, often $20-$60 per metre.
- Average installation duration for a typical 8-10 foot run: 6-10 hours.
- Per-metre labor rate reflects regional crew rates and skill level.
Regional Variations Across the United States
Location can shift per-metre pricing by 10-25% between regions. The Northeast and West Coast often see higher rates due to labor costs and logistics, while the Southeast and Midwest may be relatively lower. Regions with higher transport costs for slabs or tighter local fabricators may add $10-$40 per metre delivery surcharges. Expect mid-range installed pricing to cluster around $700-$1,000 per metre in many metropolitan markets.
Edge Profiles and Their Cost Impact per Metre
Edge choices significantly affect price per metre. A standard square edge adds minimal cost, while bullnose, bevel, or ogee profiles can add $40-$250 per metre depending on complexity and lineal length. If a signature or custom edge is requested, anticipate extended fabrication time and higher waste, which raises per-metre costs accordingly.
How Size and Scope Change the Quote
Kitchen size and run length directly scale the per-metre quote. A compact 2-metre run may land near the lower end of the range due to efficiencies, while a full 6-metre island and perimeter can push the average per metre price down slightly through bulk ordering, yet total project cost rises. L-shaped or multi-standalone islands require transitions and additional cutouts that add to both material waste and labor time.
Material Substitutes and Price Comparisons
Quartz substitutes and blends alter per-metre price at the margins. Silestone, Caesarstone, and Cambria variants sit around $270-$420 per metre, with budget versions closer to $180-$260 per metre. Porcelain surfaces can exceed quartz in some markets, running $400-$600 per metre installed, while acrylic solid-surface options stay under $250 per metre but offer different durability profiles.
Ways to Reduce Quartz Cost per Metre Without Sacrificing Quality
Smart scope management can trim per-metre cost without undermining results. Choose a standard edge and a single-slab layout to avoid piecing, accept 2 cm thickness if structurally acceptable, source from a regional fabricator to reduce delivery fees, schedule during non-peak seasons, and compare multiple quotes that include cutouts and edge work. Bundling multiple countertops (island plus perimeter) often yields a modest volume discount.
Cost Components in a Quartz Countertop Quote
The following table outlines core cost drivers that appear in most quotes for quartz worktops per metre.
| Component | Typical Range | Notes |
|---|---|---|
| Materials | $180-$520 | Quartz slab cost by brand and thickness |
| Labor | $150-$320 | Template, cuts, edge, sink fit |
| Fabrication | $60-$120 | Edge shaping, polishing, finishing |
| Delivery | $20-$60 | Distance-based |
| Edge Upgrade | $40-$250 | Bullnose, ogee, radii |
| Waste/Remnant | $0-$40 | Offcuts and scrap handling |
This mini-formula demonstrates how regional labor hours and rates combine to form the per-metre cost when expanded to a full kitchen layout.
Two Real-World Quote Scenarios Per Metre
Realistic quotes show how scope drives price per metre. Scenario A: 2.5-metre run in a suburban kitchen with standard edge and mid-range quartz. Material $260 per metre, fabrication $320 per metre, delivery $40, total installed about $620 per metre. Scenario B: 5.5-metre run in a coastal city with upgraded edge and premium quartz. Material $490 per metre, fabrication $520 per metre, delivery $60, total installed about $1,070 per metre.