Mock Tudor Board Replacement Cost: Estimated Prices Across Size, Material, and Labor 2026
Understanding the cost to replace Mock Tudor boards helps homeowners plan budgets and compare bids. The price depends on board type, substrate condition, height, and labor needs. This article breaks down typical costs and practical ways to save money while ensuring a solid finish.
Note: all prices shown are in USD and reflect common market ranges for the continental United States with standard access and materials.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Mock Tudor board replacement (total) | $2,800 | $5,000 | $9,000 | Typical residential job; includes removal, repair, and reinstallation |
| Per linear foot installed | $12 | $18 | $28 | Depends on board width and profile |
| Material (boards only) | $2.00/ft | $6.50/ft | $10.00/ft | Engineered fiberboard or hardboard options |
| Labor (scaffolding, carpenters) | $1,200 | $2,200 | $4,000 | Crew size and hours vary by height |
| Removal & disposal | $300 | $600 | $1,200 | Includes debris hauling |
| Permits & inspections | $0 | $250 | $900 | Local code and permit costs |
| Prep work (siding, substrate repair) | $400 | $1,000 | $2,000 | Rot repair, moisture treatment if needed |
What buyers usually pay for Mock Tudor Board Replacement
Typical total price ranges from $3,000 to $8,500 for standard homes in the U.S., with many jobs landing near the $4,500–$6,000 band when the boards are the primary expense and access is straightforward. Low-cost scenarios involve smaller facades, reuse of existing substrate, and minimal removal work, while high-end projects include extensive substrate repair, custom profiles, or multiple elevations requiring scaffolding.
Assumptions: mid-sized house, standard vapor barrier in place, one story with reachable eaves, moderate pitch, standard board profile.
Cost components broken down in a formal quote
Below is a concise view of the major cost buckets that appear in a Mock Tudor board replacement quote. Labor and materials dominate most invoices, but permits, disposal, and prep can shift the total by 20–40% depending on local rules.
| Category | Low | Average | High | What affects it |
|---|---|---|---|---|
| Materials | $2.00/ft | $6.50/ft | $10.00/ft | Board type, profile, finish |
| Labor | $1,200 | $2,200 | $4,000 | Crew size, hours, height access |
| Equipment & access | $150 | $700 | $2,000 | Ladders, scaffolding, lifts |
| Prep & substrate repair | $400 | $1,000 | $2,000 | Moisture treatment, rot repair |
| Disposal | $300 | $600 | $1,200 | Debris hauling, recycling |
| Permits & inspections | $0 | $250 | $900 | Local jurisdiction, plan reviews |
| Finish & sealant | $100 | $400 | $1,000 | Final coating or paint to match siding |
Variables that most influence the final Mock Tudor board price
The quoted price moves with several key factors. Board length and profile length per run directly affect material and install time; longer runs = higher per-unit costs. Substrate condition and moisture history drive prep, rot repair, and primer choices, often adding 20–40% to the bill when remediation is required.
Profile type, board thickness, and finish options
Engineered boards with textured finishes cost more upfront but may reduce maintenance. A smooth option can lower labor time but might require more detail work to achieve authentic texture. Expect a range of $3.50–$9.50 per linear foot for materials depending on profile.
Regional price differences for Mock Tudor board replacement
Prices vary by region due to labor rates, permit costs, and access challenges. In the Midwest and South, expect mid-range pricing; in the Northeast and West Coast, higher labor and permit costs push totals up. Regional delta can be 10% to 25% higher in urban coastal markets.
Pricing examples by job scope and size
For a typical 150–180 square foot facade replacement on a single-story home with standard access, a practical range is $3,800–$6,500. For two elevations totaling about 350–400 square feet and scaffolding, expect $7,000–$12,000. Smaller repairs or partial replacements may fall under $2,500 when only limited boards are involved and substrate is sound.
How to read a Mock Tudor board replacement quote
Look for a clear line item for boards, substrate prep, removal, disposal, and finish. Beware quotes that lack a separate permit line or lump prep into the labor line, as this can hide significant costs after signing. The per-foot and per-square-foot pricing should align with the board count and run length.
Ways to reduce price without compromising result
Scope control and staged replacement can spread costs over time, especially for large homes. If feasible, replace damaged boards in sections rather than all at once. Choose standard profiles over custom textures to cut material and labor time. Align project timing with off-peak seasons to reduce labor premiums.
Smart planning steps for homeowners preparing bids
Gather at least three quotes that show board type, thickness, and finish options. Ask for a materials-only quote to compare board costs separately from labor and verify whether disposal and permits are included. Check local climate considerations that might affect sealant choices and warranty.
Assumptions and notes for Mock Tudor board projects
Assumptions: two-story height is typical with reachable eaves; weather allows outdoor work during the majority of the project window; standard rot repair is not extensive. In regions with higher humidity, additional moisture mitigation may be necessary, increasing both material and labor costs.
Frequently asked price questions for Mock Tudor board replacement
Q: Do I need scaffolding? A: Yes for elevations above eye level; it adds both rental and labor costs. Q: Can I reuse existing boards? A: Reuse is possible if boards are intact and match the new profile; otherwise expect replacement costs to reflect new materials. Budget bays for contingencies of 10–15% for unexpected substrate issues.