Longboard Aluminum Siding Cost 2026
For homeowners considering longboard aluminum siding, typical costs reflect material quality, panel thickness, and installation complexity. The price range largely depends on house size, local labor rates, and added features such as insulation or finish coats. This article breaks down the cost, with clear low–average–high ranges and per-unit figures to help with budgeting.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (aluminum longboard siding) | $1.50/sq ft | $2.50/sq ft | $4.00/sq ft | Includes panels, fasteners, flashing |
| Labor (installation) | $4.00/sq ft | $6.50/sq ft | $9.50/sq ft | Floors, corners, windows; varies by complexity |
| Permits | $100 | $300 | $700 | Depends on city/county |
| Delivery/Disposal | $100 | $400 | $1,000 | Travel, waste disposal |
| Warranty & Overhead | $200 | $600 | $1,200 | General contractor margins |
Assumptions: region, panel thickness, house size, and labor hours.
Overview Of Costs
Estimated project ranges consider a typical 1,500–2,000 sq ft home. A basic setup with standard 0.032″ aluminum longboard and standard finish often lands in the low to mid range, while higher-end finishes, thicker panels, or steep roofs push into the upper end. The per-square-foot ranges help translate to total project costs: materials typically $1.50–$4.00 per sq ft, with installed pricing commonly $8.00–$14.00 per sq ft. Assumptions: region, specs, labor hours.
Price in context shows a broad spread due to regional rates, contractor availability, and added work (insulation, windows, soffits). The table above summarizes both total project ranges and per-unit ranges to support quick budgeting. For a 1,600 sq ft home, expect roughly $12,800–$22,400 installed, depending on the factors listed.
Cost Breakdown
| Materials | Labor | Equipment | Permits | Delivery/Disposal | Warranty | Overhead | Contingency | Taxes |
|---|---|---|---|---|---|---|---|---|
| $1.50–$4.00/sq ft | $4.00–$9.50/sq ft | $0.50–$1.50/sq ft | $100–$700 | $100–$1,000 | $200–$1,200 | $0–$1,000 | 5–10% | 0–8% |
Assumptions: regional labor rates, house complexity (gable, dormers), and waste handling.
What Drives Price
Key price drivers include panel thickness and profile, house size, roof pitch, and attachment method. Thicker panels (0.040″–0.048″) and premium longboard textures raise material costs more than standard finishes. A steeper roof or intricate trim increases labor time. Additional factors such as insulation under siding or a full exterior refresh add substantial cost. Assumptions: region, specs, labor hours.
Ways To Save
Cost-saving strategies focus on measured procurement and efficient installation. Consider standard thickness panels, pre-finished colors with longer warranties, and a mid-range profile to reduce labor time. Bundling related exterior projects (doors, windows, trim) can lower shared costs. Ask for detailed quotes that separate materials and labor for easier comparison. Assumptions: region, specs, labor hours.
Regional Price Differences
Price varies by region due to local labor markets and material supply. In the Northeast, installed costs may exceed the national average by about 5–12% due to higher labor rates. The Midwest often runs near the average, while the Southwest can be 0–8% lower because of milder weather and shorter installation windows. Local market variations can shift totals by ±10%–15%. Assumptions: region, specs, labor hours.
Labor & Installation Time
Typical installation timelines range from 3 to 7 days for a standard ranch or two-story home, depending on temperatures and crew size. Labor costs scale with crew hours and complexity: a small project with straightforward runs may need 20–40 hours, while complex elevations could reach 60–90 hours. Assumptions: region, crew size, and weather.
Real-World Pricing Examples
Scenario A — Basic: 1,400 sq ft, standard 0.032″ panels, flat roof, no insulation under siding. Materials $2.20/sq ft, labor $5.50/sq ft, permits $150. Total range: $13,000–$16,000. Assumptions: region, specs, labor hours.
Scenario B — Mid-Range: 1,600 sq ft, 0.036″ panels, insulated under siding, basic trim. Materials $2.80/sq ft, labor $7.00/sq ft, permits $300. Total range: $19,000–$26,000. Assumptions: region, specs, labor hours.
Scenario C — Premium: 2,000 sq ft, 0.040″–0.048″ panels, textured finish, steep pitch, upgraded flashing. Materials $3.60/sq ft, labor $9.00/sq ft, permits $600. Total range: $33,000–$46,000. Assumptions: region, specs, labor hours.