Laminate Pricing at Staples: Cost and Price Guide 2026
For many buyers, the cost to laminate at Staples hinges on page size, quantity, and service options. This guide outlines typical price ranges and what drives them, with practical estimates in USD. The phrase cost and price appear early to satisfy search intent and clarity.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 8.5×11 laminated page | $1.00 | $2.25 | $3.50 | Single-sided or double-sided varies by store |
| 11×17 laminated page | $2.50 | $3.75 | $6.00 | Ceiling for standard film thickness |
| Custom trimming or finishing | $0.50 | $1.50 | $3.00 | Per edge or per piece |
| Service fee / minimum | $0.00 | $1.50 | $5.00 | Some locations add a small setup fee |
Overview Of Costs
Costs to laminate at Staples typically range from about $1 to $6 per page, depending on size, film thickness, and finish. For a standard 8.5×11 page with a basic 3-mil to 5-mil lamination, expect roughly $1–$3 per side, with double-sided work closer to the upper end. Larger formats and specialty finishes—such as mounting or edge-sealing—push prices higher. Assumptions: region, specs, labor hours.
Cost Breakdown
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $0.50 | $1.50 | $3.00 | Standard laminating film, gloss or matte |
| Labor | $0.25 | $0.75 | $2.00 | Time-based or per-item |
| Equipment | $0.10 | $0.40 | $1.00 | Depreciation/operating costs allocated |
| Permits & Fees | $0.00 | $0.50 | $2.00 | Typical in-store charges vary |
| Delivery/Disposal | $0.00 | $0.25 | $1.00 | Not common unless bulk orders |
| Warranty / Coverage | $0.00 | $0.50 | $1.50 | Limited guarantees on finish |
| Taxes | $0.00 | $0.60 | $2.00 | State and local taxes apply |
Pricing Variables
Prices vary by store location and item size. Factors like page dimensions, laminate thickness (ranging from 3 mil to 10 mil), and whether the item is single-faced or double-sided impact cost. The presence of mounting, trimming, or corner rounding adds to the total. data-formula=”labor_hours × hourly_rate”> Local labor rates and rush service can also shift the total.
What Drives Price
Material quality and speed drive most of the price. Heavier film and specialty finishes add cost. Large formats require more lamination material and longer machine cycle times, increasing per-page pricing. In-store staff time and potential setup fees are common cost levers. Seasonal demand and promotions can temporarily lower ordinary rates.
Ways To Save
Compare sizes and services to minimize waste. If only one side is required, request single-sided lamination to cut costs. Group multiple pages in a single visit to share setup fees. Some Staples locations offer bulk pricing for classroom or office supply bundles. In select markets, off-peak hours may yield modest discounts.
Regional Price Differences
Prices differ by region and metro versus rural areas. In urban areas, per-page lamination for 8.5×11 can run around $2.00–$3.50, while suburban shops may offer $1.50–$2.75. Rural stores often sit near $1.25–$2.50 for common sizes. The gap typically mirrors local labor costs and facility overhead.
Labor & Installation Time
Turnaround time varies with queue length and item complexity. Basic single-page lamination is often ready in minutes, but multiple pages or large formats can take longer. Typical in-store processing ranges from 10 to 60 minutes per batch, with longer times during peak seasons. Assumptions: 1–10 pages, standard 8.5×11 size.
Real-World Pricing Examples
Three scenario snapshots help anchor expectations.
- Basic — 5 pages, 8.5×11, single-sided lamination, standard gloss film. Hours: 0.25; per-page: $1.25; total: $6.25 plus tax.
- Mid-Range — 10 pages, mixed 8.5×11 and 11×17, double-sided lamination, matte film, trimming included. Hours: 1.0; per-page range: $2.00–$3.00; total: $32–$40 plus tax.
- Premium — 15 pages, 11×17, premium thick film, edge sealing, mounting on foam board. Hours: 2.0; per-page: $3.50–$5.00; total: $60–$90 plus tax.
Assumptions: region, specs, labor hours.
FAQ
Q: Do all Staples stores offer lamination services? A: Most do, but service availability can vary by location. Check in-store or call ahead for pricing and lead times.
Q: Is there a minimum order? A: Some locations have a small minimum or a one-page minimum, while others charge per item regardless of quantity.
Q: Can I laminate irregular shapes? A: Some stores offer trimming or contour lamination, but pricing becomes more variable and may require custom quotes.
Assumptions: region, specs, labor hours.