Kidney Shaped Fiberglass Pool Prices: Cost and Price Ranges in the U.S. 2026
Prices for kidney shaped fiberglass pools vary by size, gel coat finish, installation complexity, and region. This article breaks down the actual cost for these custom shapes, with clear low, average, and high ranges for materials, labor, and equipment. Readers will find practical figures to budget a kidney shaped fiberglass pool project and compare quotes accurately.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Pool Shell (kidney shape, fiberglass) | $18,000 | $28,000 | $40,000 | Includes basic gel coat and finish |
| Site Prep & Grading | $2,000 | $6,000 | $12,000 | Access and slope affect cost |
| Cradle/Support & Handling | $1,000 | $3,000 | $7,000 | Transport and placement |
| Electrical & Plumbing Rough-In | $2,000 | $5,000 | $9,000 | Code-compliant hookups |
| Permits & Inspections | $400 | $1,500 | $3,000 | Depends on locality |
| Pool Decking & Surrounds | $3,000 | $8,000 | $20,000 | Material and area vary widely |
Assumptions: Midwest or national average labor rates, standard 8–10 ft deck, normal access, no water features.
Typical Cost Range for Kidney Shaped Fiberglass Pools
Buying a kidney shaped fiberglass pool typically falls between $25,000 and $55,000, with most projects landing around $30,000 to $40,000 for a mid-size shell, basic finishes, and standard installation. Per-foot pricing often runs $90 to $150 per linear foot of pool length, depending on depth and reinforcement. For larger estates or premium gel coats and lights, the high end can exceed $60,000.
Assumptions: standard 12–16 ft width, 26–32 ft length, basic coping, no water features.
Major Cost Components in Fiberglass Pool Installations
Cost components break down into shell, site work, utilities, and surrounding amenities. A typical quote will show the shell as the largest single expense, followed by excavation, plumbing, and electrical rough-ins, then decking and finishes. The table below shows representative ranges by component to help readers compare quotes.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Pool Shell | $18,000 | $28,000 | $40,000 | Kidney shape; standard gel coat |
| Site Preparation | $2,000 | $6,000 | $12,000 | Grading, drainage, access |
| Electrical & Plumbing | $2,000 | $5,000 | $9,000 | Code-compliant rough-ins |
| Decking & Coping | $3,000 | $8,000 | $20,000 | Material-driven |
| Permits | $400 | $1,500 | $3,000 | Local requirements vary |
| Equipment & Accessories | $2,000 | $5,000 | $10,000 | Heater, pump, lights |
Assumptions: Midwest labor rates, standard pump and heater, no pool automation upgrades.
Key Variables That Drive Kidney Pool Pricing
The final price relies on size, depth, and finish quality, plus site factors that add labor time. For example, a longer kidney shape with a deeper end increases the shell volume and material costs. A premium gel coat with UV resistance or a pebble plaster alternative, while common in other types, is less typical for fiberglass but can influence finish costs if upgrades are installed.
Assumptions: standard 28–32 ft length, 6–7 ft shallow end, 4–8 week install window.
Regional Price Variations for Kidney Shaped Pools
Regional differences can sway total costs by 10% to 20% depending on labor markets and permitting burden. Coastal markets or high-density urban areas may see higher site prep and decking costs, while rural regions might offer lower quotes but longer scheduling times. Readers should obtain region-specific estimates to calibrate budgets accurately.
Assumptions: suburban markets with standard permitting, no hillside challenges.
Labor Time and Installation Duration for Kidney Pools
Installation time typically ranges from 2 to 6 weeks depending on site access and decking complexity. Labor costs commonly run $75 to $125 per hour for crews, with crew size of 2–4 workers for most mid-sized projects. Longer timelines often reflect grading, plumbing runs, or custom decking.
Assumptions: normal access; weather windows allow steady progress.
Ways to Reduce Kidney Shaped Pool Costs Without Compromising Quality
Control scope and timing to unlock price reductions. Consider installing a standard depth and a simpler deck plan, choosing a basic gel coat instead of premium finishes, and scheduling during shoulder seasons when labor is more available and prices soften. Bundling permits, equipment, and decking with a single contractor can also yield savings.
Assumptions: you plan for a 28–32 ft pool with standard decking.
Per-Unit and Per-Square-Foot Pricing Details
Pricing per linear foot for kidney shaped fiberglass pools often ranges from $90 to $150, influenced by length and depth. Per-square-foot figures can be $100 to $180 when including decking and surrounding features. Breakouts help buyers align quotes for shell, deck, and utilities.
Assumptions: footprint reflects typical 6–8 ft width; decking adds to the total.
Quote Comparison: Common Scenario Examples
Three real-world examples illustrate how quotes vary by scope and region. Example A covers a 28 ft kidney pool with basic decking in a suburban market, Example B adds premium finishes in a coastal city, and Example C focuses on a larger 32 ft model with increased depth and automation in a rural area.
Assumptions: quotes include shell, site prep, rough-ins, decking, and standard permits.
Mini Labor and Material Breakdown Example
Shell: $26,000; Site Prep: $5,000; Decking: $9,500; Electrical/Plumbing: $4,500; Permits: $1,200; Equipment: $4,000. Total: around $50,000.
Formula: total ≈ sum of line items; labor hours × hourly rate included where available.