Ipe Deck Board Prices: Cost, Per-Foot Rates, and Project Planning 2026
This guide covers the cost of Ipe deck boards in the United States, including typical total prices, per-foot rates, and how different factors drive the price. Key cost drivers include board width, grade, treatment, regional labor, and installation complexity. Understanding these elements helps buyers estimate budgeting for an Ipe deck project.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Boards only (3/4 in x 5 in, kiln-dried Ipe) | $3.50 | $4.75 | $6.50 | Per linear foot, source quality varies |
| Labor to install (per sq ft) | $6.00 | $9.50 | $13.00 | Includes prep and fastening |
| Delivery within 50 miles | $50 | $120 | $220 | Dependent on quantity and carrier |
| Sealing/Finish (optional) | $0.75 | $1.50 | $2.50 | Per sq ft, varies by product |
| Waste & cutting losses | $0.25 | $0.60 | $1.00 | Per linear ft |
Assumptions: Midwest/standard labor rates, typical 3/4 in thickness, board width 5 in, no exotic fasteners, standard access.
Typical Pricing for Ipe Deck Boards by Size and Grade
Prices change with width and grade. A 5-inch-wide, Grade A Ipe board often sits around $4.50-$6.50 per linear foot, while 3.5-inch widths can land near $4.00-$5.75 per linear foot. For multi-width runs, the average installed deck boards total may range from $28 to $50 per sq ft including labor and fasteners.
Per-Linear-Foot and Per-Square-Foot Rates for Ipe
Understanding unit pricing helps compare quotes. Typical material cost is $4.00-$6.50 per foot (depending on grade and width), with installation labor adding $6-$13 per sq ft. A 200 sq ft deck using 5-inch Grade A boards might show $8,800-$13,400 for material plus $1,200-$2,600 in labor. Assumptions: mid-range grade, standard joist spacing, no specialty cuts.
Labor and Installation Labor Hours for Ipe Decking
Labor costs reflect crew size and access. A typical 200 sq ft job uses a two-person crew for 14-18 hours at $50-$75 per hour per worker, yielding $1,400-$2,700 in labor. For 300 sq ft, expect 20-28 hours at similar rates, or $2,000-$4,200. Labor efficiency and substrate prep are key price drivers.
Regional Price Variations Across U.S. for Ipe Boards
Coastal and southern markets often show higher material costs due to supply scarcity, while midwest regions may feature lower freight. Regional ranges for material plus basic installation can be $35-$70 per sq ft in high-cost regions and $28-$50 per sq ft in more competitive markets. Assumptions: standard access, typical climate zones, common fasteners.
Material Quality Effects: Grade A vs Grade B and C on Price
Grade A Ipe boards fetch the top price: typically $4.75-$6.50 per linear ft. Grade B can run $3.75-$5.25 per ft, while Grade C may dip to $3.00-$4.25 per ft. For a 200 sq ft deck using Grade A boards, material alone might be $2,000-$3,200, with added labor bringing total to $6,000-$10,000 depending on complexity. Assumptions: equal length runs and standard end-cut waste.
Common Add-Ons and Disposal Costs for Ipe Deck Projects
Extras such as edge trimming, joist replacement, or railing integration add $1,000-$3,500 on typical projects. Disposal or old deck removal can add $300-$1,000. Delivery fees average $60-$180 depending on distance. Factor in waste management when finalizing quotes.
Ways to Cut Ipe Costs Without Sacrificing Durability
Scope control can trim expenses: limit exotic edge detailing, choose standard-width boards, or reduce the deck area. Substituting with a durable, lower-cost alternative only within project constraints can save $2,000-$6,000 on mid-size decks. Assumptions: project remains wood-only without complex curves.
Sample Quote Scenarios for 100 and 300 Square Foot Projects
Scenario A (100 sq ft): material $450-$750 plus labor $900-$1,300, total $1,350-$2,050. Scenario B (300 sq ft): material $1,350-$2,250 plus labor $2,700-$4,600, total $4,050-$6,850. Quotes vary by region and grade selection.
- Regional delta example: coastal markets can add 10-20% to material and delivery costs.
- Permits rarely apply to simple deck boards but may affect larger projects with structural modifications.
For price transparency, buyers should request itemized quotes listing Materials, Labor, Delivery, and any Fees.