Interior Wall With Door Cost Guide 2026
Buyers typically pay a range for interior walls with a door driven by wall material, door type, and labor. The price also varies by room size, local labor rates, and whether finishing touches like trim and insulation are included. This guide presents cost ranges in USD and shows how per-unit pricing fits into total project estimates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Wall framing materials | $300 | $1,000 | $2,000 | 2x4s, studs, blocking for a typical 10–15 ft run |
| Drywall sheets | $200 | $700 | $1,300 | 4×8 or 4×9 sheets, XP-rated for humidity if needed |
| Door unit | $100 | $350 | $900 | Standard interior 30–36 in door, basic hardware |
| Finishes & trim | $150 | $500 | $1,000 | Joint compound, sanding, casing |
| Labor (installation) | $600 | $1,800 | $4,000 | Carpenter, helper; includes framing, drywall, door hanging |
| Permits & inspections | $0 | $100 | $400 | Depends on locality and project scope |
| Delivery & disposal | $50 | $150 | $400 | Trash, surplus materials |
Overview Of Costs
Estimated project ranges reflect typical interior walls with a standard interior door in a single room. A small 10–15 ft run with a 30–36 in door may land in the low range, while longer walls, higher doors, or premium finishes push toward the high end. Per-unit costs commonly appear as dollars per square foot and as a lump sum for labor. Assumptions: region, specs, labor hours.
Cost Breakdown
| Column | Details |
|---|---|
| Materials | Framing lumber, drywall, fasteners, primer, paint, and door hardware |
| Labor | Framing, drywall taping, mudding, sanding, door hanging, and trim |
| Equipment | Ladder, screw guns, drywall lift if needed |
| Permits | Local permit fees or inspections if required |
| Delivery/Disposal | Material transport and debris removal |
| Contingency | Typically 5–15% for unforeseen work |
What Drives Price
Door type and size significantly alter cost; a 30 in hollow core door costs less than a solid core 36 in with hardware. Wall length and height determine framing material and drywall area. Interior humidity, finish level, and insulation influence both materials and labor time.
Labor & Installation Time
Labor for a standard interior wall with a door typically ranges from 12 to 40 hours depending on room complexity, soundproofing needs, and whether the wall is load-bearing. A simple non load-bearing wall in a single room might require 12–20 hours; larger or complex walls can reach 25–40 hours. Labor costs are a major portion of the total, often comprising 40–70% of the project price.
Regional Price Differences
Prices vary by region due to labor markets and material costs. In the Northeast, expect higher labor rates than in the Midwest, while the South often sits between these ranges. In urban areas, add a regional uplift for permits and disposal. Anticipate a ±15–25% delta between big-city and rural projects for this work.
Real-World Pricing Examples
Three scenario cards illustrate typical outcomes with different specs. Assumptions: region, wall length, door choice, finish level.
Basic
Wall length 12 ft, standard 30 in hollow core door, basic drywall finish. Materials $420, Labor $1,000, Permits $60, Delivery $80. Total $1,560 with ~14 hours labor.
Mid-Range
Wall length 18 ft, 30 in solid core door, mid finish, minor insulation. Materials $900, Labor $2,100, Permits $120, Delivery $120. Total $3,240 with ~26 hours labor.
Premium
Wall length 25 ft, 36 in solid core door, premium trim, soundproofing, moisture-rated drywall. Materials $1,400, Labor $3,200, Permits $250, Delivery $180. Total $5,030 with ~38 hours labor.