How Much Do 1×6 Boards Cost: Price Ranges by Material and Size 2026
1×6 boards are a common size for fencing, paneling, and trim work. This guide details typical cost ranges for 1×6 boards in the United States, breaks down price drivers, and offers practical tips to estimate budgeting. Buyers should expect cost to vary by material, length, and local labor or delivery charges, with price per linear foot and per board common in quotes.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 1×6 board, pine, standard length 8 ft | $2.00 | $3.50 | $6.00 | Unfinished, untreated |
| 1×6 board, pressure-treated, 8 ft | $3.50 | $5.50 | $9.00 | Outdoor use, moisture resistant |
| 1×6 board, cedar, 8 ft | $6.00 | $8.50 | $14.00 | Natural rot resistance |
| 1×6 board, composite, 8 ft | $9.00 | $12.00 | $16.50 | Plastic-wood blend |
| Delivery charge (regional) | $0 | $65 | $150 | Per delivery |
| Estimated waste (scrap, cutoffs) | 0–5% | 8–12% | 15% | Useful to add to project |
Assumptions: Midwest or Southern market, standard 8 ft boards, typical home-improvement project, no heavy fabrication.
What Buyers Usually Pay For 1×6 Boards
Typical total price for a small project is often driven by board count, length, and material choice. For an 8-foot run, pine boards commonly cost $2.00-$3.50 each, or about $3-$5 per linear foot when priced by the foot across consumer outlets. Pressure-treated options range in the $3.50-$5.50 per board band, equating to roughly $4-$7 per linear foot. Premium woods like cedar typically run $6-$8 per board (about $8-$12 per linear foot), while composite options can reach $10-$12 per board or $12-$16 per linear foot. Labor and delivery can add $0-$150 depending on distance and quantity. Assumptions: standard residential plywood or framing contexts, normal access, no rush service.
Breakdown of Price by Material Type
Material choice has the largest swing in price for 1×6 boards. Pine and fir are the cheapest, while cedar, redwood, and composite materials carry higher costs. Typical ranges for 8 ft boards: pine $2.00-$3.50, pressure-treated $3.50-$5.50, cedar $6.00-$8.50, composite $9.00-$12.50. Per linear foot pricing aligns with these figures, often $0.25-$0.70 per linear foot for pine, $0.45-$1.00 for pressure-treated, $1.00-$1.25 for cedar, and $1.50-$2.00+ for composite, depending on finish and supplier. Assumptions: standard kiln-dried stock, no special finishes, regional price variation accounted.
Cost Components Behind 1×6 Board Quotes
A complete quote shows four to six components that affect price. The core components typically include Materials, Labor, Delivery, Waste/Offcuts, and sometimes Permits or Disposal, especially for exterior projects. Below is a compact view of common lines used in quotes.
| Cost Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $2.00 | $5.00 | $12.50 | Board type and length |
| Labor | $0.50 | $2.50 | $6.50 | Installation or cutting |
| Delivery/Delivery Fee | $0 | $40 | $120 | Distance-based |
| Waste/Offcuts | 0% | 8% | 15% | Material efficiency |
| Permits/Inspections | $0 | $20 | $100 | Exterior framing or fence work |
| Disposal | $0 | $10 | $60 | Packaging and scrap removal |
Assumptions: 8 ft boards, standard residential use, no rush or custom milling.
Key Variables That Drive the Final Price
Two sharp price levers are board length andmaterial class. Longer boards, like 12 ft or 16 ft, typically cost more per board but may reduce the total count for a project. Material class—especially composite or premium cedar—can push the per-board price up by 20% to 60% versus basic pine. Regional labor rates also have a meaningful impact; urban markets can add 10% to 25% compared with rural areas. Other variables include grade (select vs. standard), moisture content, and whether boards are kiln-dried or air-dried.
Ways to Reduce the Price Without Sacrificing Safety
Smart scope management can trim costs without compromising job outcomes. Consider bundling purchases for delivery, choosing standard lengths, avoiding premium finishes, and selecting economical materials where suitable. If exterior use is planned, compare pressure-treated pine against直 alternatives like cedar treated with sealant or even recycled wood options where structural requirements allow. Plan for efficient cutting to minimize waste and request exact waste estimates in the quote to avoid surprise costs during project finish.
Prices vary by region due to supply chains and demand cycles. In the Southeast, expect lower base prices on pine and pressure-treated stock, while the Northeast often shows higher delivery fees and slightly elevated material costs. The West may reflect stronger premium wood markets for cedar and composite options. A practical planning cue is to request regional quotes and to compare pickup versus delivery costs when budgeting for an 8 ft 1×6 board run.
Substitutes can significantly lower the total project cost. If a project tolerates smaller boards, using 1x4s or 1x6s as trim instead of full panels can reduce material costs by 20% to 40%. For outdoor framing, standard pressure-treated pine delivers a reliable balance of cost and durability, while composite boards carry higher upfront costs but may reduce maintenance expenses over time. Evaluate long-term maintenance and warranty terms when comparing wooden versus composite options.
Short, middle, and long scenarios show price bands across typical projects. Scenario A: 20 boards of 8 ft pine for indoor project, delivery included, total $60-$110. Scenario B: 100 boards of 8 ft pressure-treated for exterior siding, delivery and waste 10%, total $350-$750. Scenario C: 60 boards of 8 ft cedar for decorative fence, with premium finish, total $520-$1,200. These ranges assume standard access and no expedited service.
Seasonal demand shifts pricing by region. Prices may rise in spring and early summer due to higher construction activity and supply chain bottlenecks. Delaying purchases to mid-fall or winter can yield lower per-board costs, especially for standard pine and pressure-treated stock. If delivery windows are tight, expect a small premium to secure preferred timeslots.