Gutter Replacement Cost Per Foot: Price Guide 2026

Homeowners often budget by cost per linear foot when replacing gutters. The main drivers are material type, labor, and the extent of damage or alterations required. The price range below helps readers estimate the budget for typical residential projects and what factors push costs higher or lower within the United States.

Item	Low	Average	High	Notes
Per-foot materials (aluminum)	$3.50	$6.50	$12	Common residential gutters; includes basic elbows and end caps
Per-foot materials (steel)	$6	$9	$16	Roughly heavier; may require rustproof coating
Per-foot materials (copper)	$15	$25	$40	Premium aesthetic; significant cost premium
Labor & installation	$4	$9	$15	Includes mounting, sealants, and minor flashing work
Removal & disposal	$1	$2	$4	Per foot, varies by location and debris disposal rules
Additional materials	$0	$1.50	$3	Brackets, sealant, guards, splash blocks
Permits & inspection	$0	$50	$300	Depends on local code and whether upgrades are needed
Total project (typical home, 100–150 ft)	$900	$1,800	$3,500	Assumes standard aluminum gutters with basic components

Assumptions: region, gutter length, material choice, and labor hours. data-formula=”labor_hours × hourly_rate”>

Overview Of Costs

Main cost ranges reflect both per-foot material prices and labor. For standard aluminum gutters installed on a typical single-family home, expect $6–$12 per linear foot for materials plus $4–$9 per foot for labor, totaling $10–$21 per foot. In some markets or with premium materials, the per-foot total can exceed $25. For copper, prices rise sharply, often $25–$40 per foot including labor.

Cost Breakdown

Table below shows how a typical per-foot budget stacks up.

Component	Low	Avg	High	Notes
Materials	$3.50	$6.50	$12	Aluminum common; copper premium
Labor	$4	$9	$15	Hourly crew rate and access challenges
Removal & disposal	$1	$2	$4	Debris haul and recycling
Permits	$0	$50	$300	Regional variance
Delivery / Misc supplies	$0	$1.50	$3	Caulking, hangers, end caps
Warranty / Aftercare	$0	$1	$2	Limited lifetime or one-year options
Contingency	$0	$1.50	$3	Unforeseen repairs

What Drives Price

Material choice is the largest lever. Aluminum is economical; copper or zinc gutters are premium. Seamless gutters reduce joint labor but require specialized equipment. The gutter width (5 or 6 inches), profile, and internal coatings impact both cost and lifespan.

Pricing Variables

Regional differences can shift price by 5–20% for materials and labor. Local codes may require additional downspouts or splash blocks, increasing cost. House complexity, such as multi-story sections or complicated roof lines, adds time and equipment needs. A longer run with many corners often costs more per foot than a straight, short run.

Ways To Save

Shop smart with these approaches: compare multiple bids, consider standard aluminum over premium metals, and plan work in mild weather to reduce labor time. Bundling gutter replacement with related services, like downspout extensions or fascia repair, can reduce per-project overhead.

Regional Price Differences

Three-region comparison helps illustrate market variance. In the Northeast, labor rates are typically higher, adding 8–15% above national averages. The Midwest often shows mid-range pricing with steady material costs. The Southwest tends to be more affordable on labor but can see price spikes during peak season due to demand. Expect overall project price deltas of roughly ±10–18% between these regions for similar specs.

Labor, Hours & Rates

Install time matters because gutter work is labor-intensive and weather-sensitive. A basic 100–120 ft job may take 1–2 days for a small crew, with crew rates ranging from $60–$120 per hour per crew depending on city and experience. For premium materials or complex roof lines, add 20–40% more labor hours.

Additional & Hidden Costs

Hidden fees to anticipate include permit fees in certain jurisdictions, disposal taxes, and potential ladder or scaffold rental. If fascia repair is needed, expect added costs for materials and carpentry. In older homes, hidden damage behind siding or under eaves can require extra labor.

Real-World Pricing Examples

Three scenario cards illustrate common outcomes with clear line items.

1. Basic — 100 ft aluminum, standard five-inch gutters, 1 story, no repairs.
   Assumptions: region, basic install, no downspout upgrades.
   • Materials: $6.00/ft × 100 ft = $600
   • Labor: $8.50/ft × 100 ft = $850
   • Disposal: $2/ft × 100 ft = $200
   • Permits: $0–$50
   • Total: $1,500–$1,700
2. Mid-Range — 125 ft aluminum seamless, 1 story, minor fascia repair.
   Assumptions: region, seamless option, minor carpentry involved.
   • Materials: $8.50/ft × 125 ft = $1,062.50
   • Labor: $9.00/ft × 125 ft = $1,125
   • Disposal: $2.50/ft × 125 ft = $312.50
   • Permits: $60–$120
   • Fascia repair: $300–$600
   • Total: $2,860–$3,320
3. Premium — 150 ft copper or high-end anodized aluminum, multiple stories, complex run.
   Assumptions: premium metals, complex roof geometry.
   • Materials: $25/ft × 150 ft = $3,750
   • Labor: $12/ft × 150 ft = $1,800
   • Disposal: $3/ft × 150 ft = $450
   • Permits: $150–$500
   • Warranty & extras: $200–$600
   • Total: $6,350–$7,750

Assumptions: region, specs, labor hours.