Dryer Bearing Replacement Cost: A Price Guide 2026
Homeowners typically pay a few hundred dollars for dryer bearing replacement, with costs driven by parts, labor, and dryer model. The price range reflects bearing type, drum support components, and accessibility inside the cabinet. This guide presents cost estimates in USD, including low, average, and high ranges, to help planning and budgeting.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Parts | $60 | $180 | $350 | Bearing kit, seals, bushings, and possibly drum support |
| Labor | $80 | $250 | $500 | 2–5 hours depending on access and model |
| Service Call/Trip | $0 | $40 | $80 | If retailer or repair shop charges a visit fee |
| Parts & Supplies | $20 | $60 | $120 | Lubricants, mounting hardware |
| Disposal / Delivery | $0 | $20 | $50 | Removal of old parts or transporting waste |
| Total Estimate | $200 | $450 | $900 | Assumes typical front- or top-load dryer, mid-range model |
Overview Of Costs
Cost range for dryer bearing replacement generally spans from a low around $200 to a high near $900, with an average near $450. Assumptions: front- or top-load, standard drum-bearing kit, accessible interior.
Cost Breakdown
Below is a consolidated view of the main cost categories and typical dollar ranges. The table uses a mix of total project costs and per-unit pricing where relevant.
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $60 | $180 | $350 | Bearing kit, seals, bushings |
| Labor | $80 | $250 | $500 | 2–5 hours, depending on model and access |
| Equipment | $10 | $30 | $80 | Basic tools or specialty pullers if needed |
| Permits | $0 | $0 | $0 | Typically not required for residential dryers |
| Delivery/Disposal | $0 | $20 | $50 | Old parts disposal or new parts delivery |
| Contingency | $20 | $40 | $100 | Extra for unforeseen wear or hardware |
What Drives Price
Labor is the single largest variable. Access through the cabinet, drum removal, and the need to re-tension belts or align the drum can add hours. Assumptions: average 2–4 hours labor; higher end for older or high-efficiency models.
Factors That Affect Price
Several specific factors influence the final bill: drum bearing type, drum support rollers, dryer age, model complexity, and regional labor rates. Higher-end models with sealed bearing kits or multiple moving parts cost more to replace. Regional differences in hourly rates can shift totals by ±10–25% across urban, suburban, and rural areas.
Regional Price Differences
Prices vary by region due to labor markets and parts availability. Urban areas tend to be higher than rural areas for both labor and service charges, while suburban regions fall in between. Assumptions: standard service area, typical part availability.
Labor & Installation Time
Typical repair times range from 1.5 to 4 hours, depending on dryer access, model, and whether the belt or pulleys need replacement alongside the bearing. Plan for potential additional time if drum removal requires disconnecting wiring harnesses. Labor rates commonly run $75–$125/hour.
Additional & Hidden Costs
Some jobs incur extra fees: diagnostic charges, trip fees for out-of-area service, or disposal fees for old parts. Hidden costs can push the total toward the higher end of the range. Assumptions: no major electrical work required; no emergency weekend service.
Real-World Pricing Examples
Three scenario cards illustrate typical quotes for different dryer profiles. All prices are before tax and may vary by provider.
-
Basic: Front-load dryer, standard metal-bearing kit, no additional repairs.
- Specs: standard drum bearing, 1 shaft seal
- Labor: 2.0 hours @ $90/hr
- Parts: $80
- Total: $230–$320
- Notes: lowest-cost path with minimal drama.
-
Mid-Range: Front-load or HE top-load with pulley wheel and belt check.
- Specs: bearing kit + roller assemblies
- Labor: 3.5 hours @ $100/hr
- Parts: $140
- Total: $420–$700
- Notes: common for mid-cycle wear and minor accessory replacements.
-
Premium: Older model with multiple wear items, possible motor or drum support replacement.
- Specs: bearing kit + support rollers + belts
- Labor: 4.5 hours @ $120/hr
- Parts: $260
- Total: $800–$1,100
- Notes: higher complexity or rare parts increase cost significantly.
Maintenance & Ownership Costs
Replacing dryer bearings can extend appliance life and reduce energy waste, but ongoing maintenance remains important. Periodic drum support checks and belt inspections help prevent recurring failures. Assumptions: no recurrences within 12 months.
Assumptions: region, specs, labor hours. The figures above reflect typical residential dryer repair scenarios in the United States and aim to balance accuracy with practical budgeting.