Cost to Replace a Spigot: Price Ranges, Parts, and Labor 2026
This article covers what buyers typically pay for replacing a spigot, including exact cost ranges for parts, labor, and common scenarios. The price to replace a spigot depends on the type (standard vs frost-free), accessibility, and regional labor rates. The following figures help estimate the cost to replace a spigot in a typical U.S. home.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Spigot replacement (labor + parts) | $120 | $210 | $350 | Standard outdoor faucet, accessible, no frost-free valve |
| Parts (valve, packing, stem, handle) | $20 | $60 | $120 | Includes basic shutoff valve if needed |
| Frost-free spigot upgrade | $180 | $280 | $520 | Higher labor and material cost |
| Permits or inspections | $0 | $0 | $0 | Typically not required for residential exterior spigots |
| Delivery/Disposal | $0 | $10 | $25 | Minimal disposal of old hardware |
Assumptions: Midwest labor rates, standard lead-free brass materials, normal access, no wall repair required.
Typical Total Price for Replacing a Spigot in a Mid-Range Scenario
Most homeowners see a total cost around $180 to $300 when replacing a standard outdoor spigot with accessible installation. This includes a basic shutoff valve, new packing, and labor for a typical 20- to 30-minute on-site task. If the old line has corrosion or the faucet is embedded behind siding, the price can rise. Expect higher costs in areas with steep labor rates.
Cost Breakdown: Major Components of a Spigot Replacement Quote
Materials cover the valve, packing nut, stem, ferrule, and handle, typically $20-$60. Labor for a standard faucet swap averages $90-$180, depending on accessibility. Equipment such as a pipe cutter or shutoff valve tool adds $10-$40. Permits are rarely needed for residential exterior faucets, but may apply in some regions. A compact table below shows a representative quote.
| Cost Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $20 | $60 | $120 | Brass components, packing |
| Labor | $90 | $150 | $180 | 1.0–2.0 hours typical |
| Equipment | $5 | $15 | $40 | Basic tools |
| Permits/Inspections | $0 | $0 | $0 | Usually none |
| Delivery/Disposal | $0 | $5 | $25 | Old faucet removal |
What Drives the Price: Frost-Free vs Standard Spigots
Frost-free spigots cost more due to extended installation length, more complex shutoff linkage, and potential interior wall access. Typical price range is $180-$520, with the high end tied to wall penetration, attic or crawlspace access, or long run lengths. Standard faucets average $120-$350 depending on accessibility and valve quality.
Regional Variations That Move the Quote
Labor rates vary by region, with the Midwest often lower than the West Coast. Expect a regional delta of 10%–25% on average costs. In urban areas or homes with difficult access, prices trend toward the higher end of the ranges. The table below shows representative regional adjustments.
| Region | Low | Average | High | Notes |
|---|---|---|---|---|
| Midwest | $120 | $210 | $320 | Standard access |
| South | $130 | $220 | $360 | Moderate climate, mixed housing |
| Northeast | $140 | $240 | $420 | Higher labor rates, weather constraints |
| West | $150 | $260 | $520 | Urban cores can push higher |
Scenario: Replacing a Frost-Free Spigot on the Exterior Wall
Scenario costs depend on run length and interior routing. A frost-free model typically requires running a long piece of pipe inside the wall from the interior shutoff to the exterior faucet. For a 6–8 ft run with indoor access, anticipate $250-$400 in total. If interior drywall or siding removal is needed, the total can rise to $450-$520.
Variables That Most Alter the Quote
Run length and access are top cost drivers: longer pipe inside walls or hard-to-reach areas add labor hours. Pipe material and valve quality affect both parts and replacement durability, with brass components at the higher end. A third driver is seasonal scheduling, where demand can push small jobs into nearby weeks. Typical thresholds: run length over 6 ft adds $50-$150; exterior access through siding adds $50-$100 more.
Ways to Trim Price Without Sacrificing Function
Scope control matters: replace only the valve and handle if the line is intact, rather than rerouting a long run. Time the work during milder weather or off-peak demand to reduce labor surcharges. Choose standard materials over premium finishes, and compare quotes to ensure similar warranties. A practical cost-saving path keeps the job simple and avoids unnecessary upgrades.
Three Real-World Quote Examples With Specs
Example A: Standard outdoor spigot replacement, 1.0 hour, no interior work. Materials $40, Labor $110, Equipment $10, Total $160. Example B: Frost-free spigot with 6 ft interior run, drywall access required. Materials $90, Labor $170, Equipment $25, Total $285. Example C: Frost-free upgrade with wall repair and insulation, 2.5 hours. Materials $110, Labor $260, Equipment $40, Total $410.
| Scenario | Materials | Labor | Equipment | Delivery/Disposal | Total |
|---|---|---|---|---|---|
| Example A | $40 | $110 | $10 | $0 | $160 |
| Example B | $90 | $170 | $25 | $0 | $285 |
| Example C | $110 | $260 | $40 | $0 | $410 |
Billing Formats: Per-Unit or Per-Job Pricing
Per-unit pricing is common for a single spigot, but when a job includes interior wall access, pricing becomes per-job. Typical per-unit ranges are $120-$350 for standard installs and $180-$520 for frost-free upgrades. When multiple spigots are replaced in one visit, expect a bundled labor rate.