Current Cost

Cost to Replace Kitchen Cabinets and Countertops 2026

November 12, 2025

Homeowners typically spend between $6,000 and $22,000 for a full cabinet and countertop replacement, with costs driven by material quality, layout work, and installation complexity. The price range varies widely depending on cabinet style, countertop material, and labor rates. This article breaks down the cost to replace kitchen cabinets and countertops, with practical estimates to help set a budget and compare options.

Item Low Average High Notes
Cabinets (stock) $3,000 $6,000 $12,000 Basic framed cabinets, standard finishes
Cabinets (semi-custom) $6,000 $12,000 $24,000 Shaped boxes, better materials
Countertops (laminate) $1,000 $2,500 $4,000 Low-cost option
Countertops (granite/marble) $3,000 $6,000 $12,000 Premium slabs, fabrication
Countertops (quartz) $3,500 $7,500 $15,000 Engineered stone, durable
Labor & installation $2,000 $6,000 $12,000 Removal, delivery, install
Demolition & disposal $500 $1,500 $3,000 Old cabinets, countertops
Plumbing & electrical alterations $500 $2,000 $5,000 Sink, faucet, lighting
Permits & design $0 $500 $2,000 Permits where required
Delivery/installation supplies $200 $800 $2,000 Protective wrap, fasteners

Assumptions: region, specs, labor hours.

Overview Of Costs

Typical cost range overview: Replacing kitchen cabinets and countertops usually falls within a broad spectrum, reflecting choices in cabinet style, material quality, and countertop surface. The total project range often spans from about $6,000 to $22,000, with per-unit estimates such as cabinet cost per foot and countertop price per linear foot varying by material. For planning, consider that labor and installation can account for a sizable portion of the budget, and high-end materials dramatically raise the total.

data-formula=”labor_hours × hourly_rate”> Jobs with custom layouts or unusual spaces may push the price toward the upper end.

Cost Breakdown

Top-level allocation shows where money goes in a typical project. The table below uses a mix of totals and per-unit pricing to reflect both scope and material choices. Assumptions: standard 10–12 ft kitchen, mid-range materials, basic customizations.

Category Low Average High Assumptions Per-Unit
Materials $4,000 $9,000 $20,000 Cabinets + countertops cabinet $/foot, countertop $/sq ft
Labor $2,000 $6,000 $12,000 Removal, install, adjustments hourly rates apply
Equipment $200 $1,000 $3,000 Tooling, cutting, support one-time
Permits $0 $500 $2,000 Local requirements –
Delivery/Disposal $200 $800 $2,000 Old material removal –
Warranty $0 $500 $2,000 Manufacturer/installer coverage –
Contingency $500 $1,500 $4,000 Unforeseen fixes –
Taxes $200 $1,000 $3,000 State/local taxes –

Assumptions: region, specs, labor hours.

What Drives Price

Key drivers include cabinet complexity, material selection, and labor intensity. The following thresholds help set expectations: Type of cabinet (stock vs semi-custom vs custom) and countertop material (laminate vs quartz vs granite) each push the totals differently. Complexity of layout, such as curved corners or tall cabinets, can add both time and waste. Selections like full-height backsplashes or integrated lighting also elevate costs.

Assumptions: region, specs, labor hours.

Ways To Save

Budget-friendly strategies focus on balancing aesthetics with durability. Consider cabinet refacing instead of full replacement for a refreshed look. Opt for mid-range countertops like quartz or solid-surface, which offer durability without premium pricing of rare stones. Ordering standard sizes and scheduling installation during slower seasons can lower labor costs.

Assumptions: region, specs, labor hours.

Regional Price Differences

Prices vary by region due to labor markets, material access, and permitting costs. In the Northeast, higher labor rates can push total costs up by 15–25% versus the Midwest. The West generally aligns with national averages but may see premium for quartz and granite. Rural areas often benefit from lower labor costs yet face higher delivery fees if destinations are remote.

Assumptions: region, specs, labor hours.

Labor & Installation Time

Time and crews influence price significantly. A straightforward 10–12 ft kitchen with stock cabinets and laminate countertops may take 3–5 days, including removal and cleanup. A mid-range upgrade with semi-custom cabinets and quartz counters can require 1–2 weeks, depending on fabricator lead times and layout revisions. Longer projects typically incur higher labor costs and storage needs.

Assumptions: region, specs, labor hours.

Real-World Pricing Examples

Scenario snapshots give concrete context for budgeting. Three cards below show how choices affect totals.

Basic: Stock cabinets, laminate countertops, standard layout. 10–12 ft kitchen. Labor 40–60 hours. Total: $6,000–$9,500. Per-foot: cabinets $60–$120; countertops $25–$40.

Mid-Range: Semi-custom cabinets, quartz countertops, mid-range backsplash. 10–12 ft kitchen. Labor 60–90 hours. Total: $12,000–$18,000. Per-foot: cabinets $100–$200; countertops $50–$100.

Premium: Custom cabinets, granite or high-end quartz, integrated lighting, and shelving. 12 ft kitchen. Labor 90–140 hours. Total: $20,000–$35,000. Per-foot: cabinets $150–$350; countertops $70–$150.

Leave a Reply

Your email address will not be published. Required fields are marked *