Cost of Double French Doors: Price Ranges, Materials, and Savings 2026
The cost of double French doors varies by size, material, glass options, and installation complexity. Buyers typically pay a broad range that reflects frame material, hardware, and regional labor rates. This article presents the price picture, including per-unit and per-square-foot figures, to help plan a budget for double French doors.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Door unit (standard 72″ x 80″) | $800 | $1,500 | $3,000 | Wood or engineered wood; basic finish |
| Door unit (54″ x 96″); extra width | $1,000 | $2,100 | $4,200 | Higher glass area, heavier frame |
| Labor and installation | $1,200 | $2,000 | $4,000 | Removal of old doors, framing, shimming, sealing |
| Hardware and accessories | $80 | $350 | $750 | Locks, handles, hinges, weatherstripping |
| Glass upgrades | $100 | $400 | $1,200 | Low-E, double-glazed, or decorative glass |
| Finish and paint | $100 | $350 | $900 | Interior or exterior coating |
| Permits and inspections | $0 | $150 | $1,000 | Depends on local codes |
Assumptions: Midwest labor rates, standard vinyl or wood frame, no structural changes, standard 2×4 rough opening, normal access.
Cost Breakdown for Double French Doors by Size and Style
Double French door pricing hinges on frame material, panel configuration, and decorative details. A typical setup includes two doors, each with multiple panels and glass inserts. For a standard 72″ x 80″ opening, expect a total door unit price in the $1,200–$2,600 range for mid-range materials, plus $1,000–$2,000 in installation labor depending on site conditions. Heavier hardwoods or premium aluminum frames push the price higher, especially with specialty finishes.
Materials Impact: Vinyl, Wood, or Aluminum Frames
Frame material is the largest price driver after size. Vinyl frames tend to be the least expensive, often $800–$1,400 per pair with standard glass. Wood frames can range from $1,200–$2,800 per pair, depending on species and finish. Aluminum or steel framed doors commonly start around $1,700 and can exceed $3,500 per pair when combined with premium glass and multiple locking points. Per-unit pricing varies by width and height, so larger openings quickly accumulate material costs.
Labor and Installation: Typical Hours and Rates
Labor cost depends on existing frame and opening condition. Basic removal of old doors and installation of new units typically runs $1,200–$2,000 for a standard 72″ x 80″ job. In renovations requiring reframing, leveling, or structural shimming, labor can rise to $2,500–$4,000. Expect longer schedules in regions with high demand or limited skilled installers. A standard installation uses sealants, shims, screws, and weatherstripping included in the price.
Regional Variations in Northeast, South, Midwest, and West
Location affects both material availability and labor rates. In the Northeast, costs often trend toward the high end: $1,600–$2,900 for doors plus $1,600–$3,000 installation. The Midwest may show $1,300–$2,400 for the unit and $1,100–$2,200 for labor. The South can be more budget-friendly, with combined prices around $1,200–$2,600 door units and $900–$1,800 for installation. The West commonly lands in the $1,600–$3,000 range for units and $1,200–$2,200 for labor, depending on urban vs. rural markets.
Hardware, Finishes, and Glass: Per-Unit Add-Ons
Hardware quality and glass options add measurable costs. Locks, handles, and multi-point hardware can add $80–$350 per pair. Low-E or triple-pane glass, decorative grills, and thicker insulated panes commonly add $150–$800 per door pair. Finishes such as high-gloss paint or varnish can add $100–$300 per unit, while factory pre-finish can reduce on-site labor time.
Energy Efficiency and Glass Options: Price Effects
Energy-rated glass improves comfort and long-term savings, affecting upfront price. Standard double-pane insulated glass is typical; upgrading to Low-E or laminated glass can add $100–$600 per door pair. Vacuum-sealed or argon-filled units, plus higher SEER ratings, may push costs toward the upper end of $1,800–$3,500 per pair for premium configurations.
Ways to Cut Costs on Double French Doors Without Sacrificing Quality
Careful scope management and material choice can trim the total. Consider vinyl frames with standard glass to stay near the lower end of the price spectrum. If the opening is non-standard, anticipate a modest rise in framing work and hardware. Scheduling projects in off-peak seasons or bundling the door replacement with other exterior updates can reduce contractor travel and lead-time charges. Compare quotes from at least three local installers to identify meaningful savings on labor and delivery.
Seasonal Price Shifts and Availability for Double French Doors
Demand spikes during new construction seasons can raise prices. Spring and early summer typically see higher installation demand, driving labor costs up by 5–15% in some markets. Waiting for promotions or opting for ready-to-fit stock sizes can help reduce lead times and costs, but may limit finish options. If a quick project is needed, expect premium scheduling charges or rush fees from contractors.
Quote Snapshot: Typical Two-Story Home Case
Representative example helps compare offers. A two-door, 72″ x 80″ unit in mid-range wood with standard glass often lands at $1,400–$2,200 for the doors and $1,200–$2,000 for installation. Total project cost frequently falls in the $2,600–$4,200 range, including basic hardware and weatherstripping. For premium finishes or larger openings, totals can exceed $6,000.
| Cost Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Door unit (72″ x 80″, standard finish) | $800 | $1,500 | $2,600 | Vinyl to mid-range wood |
| Labor and installation | $1,200 | $2,000 | $3,500 | Removal, framing, sealant |
| Hardware and weatherstripping | $80 | $350 | $700 | Locks, hinges, weatherstripping |
| Glass upgrade options | $100 | $350 | $800 | Low-E, double glass |
| Permits and inspections | $0 | $150 | $1,000 | Local requirements |