Cost to Add Laundry Hookups 2026
Homeowners typically pay to add laundry hookups when planning a remodel or finishing a basement. Main cost drivers include plumbing reroutes, electrical needs, and space layout. This guide covers the price range in USD, with practical cost estimates and per-unit considerations to help budgeting and bidding.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Project total | $1,500 | $3,000 | $8,000 | Assumes moderate rerouting and standard 120V circuits. |
| Labor | $600 | $1,200 | $3,000 | Includes plumber and electrician, at $70–$120/hour each. |
| Materials | $400 | $1,100 | $2,700 | Valves, PEX piping, supply lines, outlets, connectors. |
| Permits & inspections | $100 | $400 | $1,000 | Varies by city and scope. |
| Electrical work | $300 | $900 | $2,000 | New outlet, circuit extension, GFCI as required. |
| Water supply & drain lines | $200 | $800 | $2,000 | Dryer venting may add complexity. |
| Cleanup & disposal | $150 | $400 | Debris removal and site cleanup. |
Assumptions: region, scope, and existing plumbing layout influence costs and timelines. Assumptions: region, specs, labor hours.
Overview Of Costs
Cost to add laundry hookups typically ranges from about $1,500 to $8,000, with most projects landing in the $3,000–$5,000 band when rerouting plumbing and adding electrical service are uncomplicated. Material choices, pipe material, and the distance from existing plumbing heavily impact totals. Per-unit estimates include roughly $300–$900 for new water supply lines and $200–$1,000 for drainage connections, depending on run length and fittings.
Cost Breakdown
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $400 | $1,100 | $2,700 | Pipes, fittings, valves, connectors, outlets, venting. |
| Labor | $600 | $1,200 | $3,000 | Plumber and electrician labor combined. |
| Permits | $100 | $400 | $1,000 | Regional permit requirements may apply. |
| Electrical work | $300 | $900 | $2,000 | Outlet, circuit, GFCI protection if needed. |
| Delivery/ disposal | $50 | $150 | $400 | Removal of old fixtures and waste. |
| Taxes | $0 | $120 | $600 | Depends on local tax rules. |
Pricing Variables
Key price drivers include distance to existing water and sewer lines, whether a new vent is required, and if the laundry area requires a new 220V dedicated circuit or just a 120V outlet. In retrofit scenarios, long pipe runs and complex wall or floor penetrations can multiply costs. Typical ranges reflect standard homes with accessible spaces.
Regional Price Differences
Prices vary by region due to labor rates and permit costs. In the Northeast, expect higher permit and labor costs; the Midwest often presents mid-range pricing; the South may offer lower overall labor and material costs. Regional differences can shift total by roughly +/- 15–30% depending on local codes and contractor availability.
Labor, Hours & Rates
Labor is commonly charged per hour, with plumbers at about $70–$120/hour and electricians at similar ranges. A typical installation may require 6–20 hours of combined labor, plus 1–2 hours for inspections and adjustments. data-formula=”labor_hours × hourly_rate”> Labor efficiency and crew size directly affect the final bill.
Additional & Hidden Costs
Hidden costs can include longer run lengths, difficult access, re-running joists or drywall, or needing a new dryer vent. Unexpected issues such as mold remediation or structural reinforcement may add $500–$3,000. Always budget a contingency of 10–20% for surprises in older homes.
Real-World Pricing Examples
Basic scenario: single-story home, short run from existing laundry area to new hookups; standard 120V outlet; no major wall work. Specs: 1–2 hours of labor, minimal materials. Total around $1,500–$2,300. Per-unit costs: $150–$350 for materials, $75–$120/hour labor.
Mid-Range scenario: two-story home, moderate rerouting, new 120V outlet, basic venting; permit required. Total around $2,800–$4,800. Labor: 6–12 hours; materials: $600–$1,500; permits: $150–$600.
Premium scenario: congested space, long plumbing and vent runs, new dedicated 20A/120V circuit, plumbing rework in multiple walls; complex drywall work. Total around $5,000–$8,000+. Labor: 12–20 hours; materials: $1,200–$2,700; permits: $400–$1,000.
What Drives Price
Project scope and existing utilities are primary determinants. If the laundry area is on a distant floor or involves cutting through blocks or concrete, expect higher costs. If the space is already plumbed and wired for a washer/dryer, costs drop significantly.