Cost of 3/4 Inch Plywood 2026
The cost of 3/4 inch plywood varies by type, thickness quality, and where it’s purchased. Buyers should expect major cost drivers to be sheet size, grade, and delivery. Understand the price range to plan budgets for projects like flooring, subflooring, or cabinetry.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 3/4″ Plywood (4×8 sheet) | $40 | $60 | $90 | CDX or standard plywood varies by grade |
| Premium/Baltic Birch (4×8) | $70 | $95 | $130 | Higher strength and nicer veneer |
| Delivery (within 20 miles) | $15 | $40 | $70 | Depends on quantity |
| Tax & Fees | $0 | $5 | $15 | Location dependent |
Overview Of Costs
Typical price range for a 4×8 sheet of 3/4″ plywood spans roughly $40–$90 depending on grade and type, with premium options often exceeding $100 per sheet. For budgeting, assume a fall/wall-to-wall project uses 10–20 sheets.
Per-square-foot costs commonly fall in the $1.25–$2.50 range when considering standard plywood and delivery. Assumptions: region, quantity, and selected grade.
Cost Breakdown
Table shows major cost components for a typical plywood project.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $400 | $700 | $1,200 | Depending on number of sheets and grade |
| Labor | $0 | $150 | $600 | Flooring or cabinetry install labor varies |
| Equipment | $0 | $25 | $150 | Knots, nails, fasteners, tools |
| Delivery | $15 | $40 | $100 | Distance affects cost |
| Permits/Fees | $0 | $5 | $20 | Typical if project triggers permits |
| Waste/Contingency | $10 | $40 | $100 | Scrap or cut-offs |
| Warranty/Support | $0 | $5 | $20 | Vendor options |
| Taxes | $0 | $20 | $60 | State/local taxes |
What Drives Price
Material grade and veneer quality are major drivers, with Baltic birch or premium veneers costing substantially more than standard CDX. The second driver is sheet size availability and stock; specialty sheets or tongue-and-groove edges increase price.
Other factors include board straightness, moisture resistance coatings, and vendor discounts for bulk purchases. Regional supply constraints can shift price by 10–20% seasonally.
Ways To Save
Shop for closeout or mill-direct options to reduce costs without sacrificing structural integrity. Buying in bulk can yield lower per-sheet pricing, especially if the project requires many sheets.
Consider alternatives such as standard plywood with a face veneer option or using drop-in replacement panels when appropriate. Planning includes estimating waste and optimizing sheet layout to minimize offcuts.
Regional Price Differences
Prices vary by region due to transportation and demand. In the Northeast, CDX pricing commonly runs higher than the Midwest due to logistics, while the South may see lower base rates. West Coast markets often show premium veneer options with higher per-sheet costs.
Example deltas: Northeast +8–14%, Midwest ±0–6%, West Coast +10–18% vs national average. Assumptions: regional pricing, current supply chains.
Labor & Installation Time
Labor costs depend on the project scope and whether plywood is used as subflooring, underlayment, or visible paneling. A typical install might take 4–8 hours for a small room, with crew rates around $40–$80 per hour.
Mini formula: data-formula=”labor_hours × hourly_rate”>. If 6 hours at $60/hour, labor equals $360 before materials tax/delivery.
Real-World Pricing Examples
Assumptions: region, project type, and quantity.
- Basic A 1200 sq ft subfloor replacement using standard CDX plywood on 40 sheets: Sheets $45 each, delivery $25, labor 5 hours at $60/hr. Total $2,125 with taxes and contingency.
- Mid-Range Cabinet-grade 3/4″ plywood for a kitchen remodel on 25 sheets: Sheets $85, delivery $40, labor 8 hours at $70/hr. Total $2,725 plus minor waste.
- Premium Baltic birch panels for durable cabinetry on 30 sheets: Sheets $110, delivery $60, labor 10 hours at $80/hr. Total $4,520.
Assumptions: region, specs, labor hours.