Concrete Lintels Price List With Realistic Cost Ranges 2026
This article presents concrete lintels price and pricing ranges buyers typically see in the U.S. market. It covers common sizes, installation factors, and how costs accumulate from materials to labor. The concrete lintels price is driven by size, span, reinforcing, and regional labor rates, so the ranges below reflect typical variations across residential projects.
Assumptions: standard 6-foot to 9-foot spans, clay or concrete blocks above openings, mid-range concrete mix, and normal site access.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Concrete lintel 4×12 in, 6 ft | $60 | $110 | $180 | Uninstalled, standard precast or cast-in-place |
| Concrete lintel 6×12 in, 8 ft | $90 | $150 | $260 | Includes basic reinforcement |
| Concrete lintel 8×12 in, 10 ft | $140 | $210 | $340 | Higher load rating or longer span |
| Precast reinforced concrete lintel, 6×12 in, 8 ft | $170 | $230 | $360 | Factory-made, delivery included varies by region |
| Steel-reinforced concrete lintel, 6×12 in, 8 ft | $190 | $260 | $420 | Higher cost but improved load and durability |
| Installation labor (per lintel), 6-8 ft spans | $120 | $240 | $420 | Includes form work and curing time |
| Delivery/haul-away (per job) | $40 | $90 | $180 | Distance dependent |
Data is presented in USD and reflects typical market ranges. Per-unit prices assume standard residential openings, single-story construction, normal access, and standard site conditions.
Typical Concrete Lintel Sizes and Price Ranges
Concrete lintels come in several common sizes to fit standard openings. The price varies with length and cross-section, with longer spans and larger sections costing more. Expect higher costs for heavier lintels or longer spans that require greater reinforcement. For owners planning projects, the price per lintel typically scales with length and thickness, while smaller openings stay toward the lower end of the range.
Cost Components That Shape a Concrete Lintel Quote
A complete price quote breaks the project into core parts. The table below shows typical components and how they influence the final number. Materials and labor are usually the largest drivers, with delivery and permits adding modest add-ons.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (lintel, reinforcement, formwork) | $60 | $130 | $260 | Precast or cast-in-place variances |
| Labor (installation, formWork, curing) | $120 | $240 | $420 | Crews of 1-2; depends on span |
| Equipment | $10 | $40 | $90 | Scaffolding, concrete mixer if cast-in-place |
| Permits & inspections | $0 | $50 | $200 | Local rules vary |
| Delivery/Delivery surcharge | $20 | $60 | $120 | Distance-based |
| Waste disposal | $0 | $20 | $70 | Site clean-up |
| Warranty | $0 | $15 | $50 | Limited coverage typically included |
Strong variables that shift the final lintel price
Two key drivers consistently move quotes up or down. First, the span and cross-section: every additional foot of length adds material and labor, and thicker lintels require more steel reinforcement and formwork complexity. Second, whether the job uses precast or cast-in-place lintels; precast reduces on-site labor but adds delivery costs and regional availability. Spans over 8 ft may push the price into the high range. Consider a 6×12 in lintel for a 8 ft opening vs a 8×12 in for the same span, which often requires extra reinforcement and may change the labor time by 15-25%.
Regional pricing differences for concrete lintels
Prices vary by region due to labor wages, material transport, and demand. In the Midwest, expect mild adjustments versus the West Coast or Northeast. A typical regional delta is ±10% to ±20% from the national average for standard sizes. Urban markets tend to see higher labor rates and delivery fees. The table below illustrates a sample delta by region, assuming the same opening size and material choice.
Labor rates and installation time for lintels
Labor is often quoted as a fixed per-lintel charge or as an hourly rate with estimated hours. A 6 ft lintel installation may take 2-4 hours for a small crew, while longer spans and more complex formwork can extend to 6-8 hours. In hourly terms, crews frequently charge $75-$125 per hour. Project duration and crew size are common levers a contractor uses to adjust price.
Example: 6 ft lintel with standard reinforcement might be priced as $120-$240 for labor, excluding material and delivery. If a second lintel is added, some contractors offer bundled labor discounts within a single trip.
Upgrade options: standard vs precast vs steel-reinforced
Choosing between standard concrete, precast, or steel-reinforced lintels affects both price and performance. Standard concrete lintels are typically the lowest priced option. Precast lintels can save on on-site labor but add handling and delivery costs. Steel-reinforced lintels raise material costs but improve load capacity and longevity. Project scope and required load rating drive the upgrade decision. A typical 8 ft opening might range from $140-$210 for standard concrete, $190-$360 for precast reinforced, and $260-$420 for steel-reinforced with installation.
Strategies to reduce the concrete lintel price without compromising safety
Cost-saving approaches focus on scope control and efficient choices. Consider matching lintel size to actual load requirements, reuse existing formwork where possible, and plan on off-peak scheduling to reduce labor costs. Compare quotes that bundle delivery with installation to avoid separate trucking charges. Bundling services and selecting standard-size lintels for common openings typically yields savings.
Practical comparison: regional price scenarios
Below are example price ranges for the same opening in different U.S. markets. Sizes and types are kept constant to illustrate regional effects. Assumptions: standard blocks, typical weather, no expedited delivery.
| Region | Lintel Size | Low | Average | High | Notes |
|---|---|---|---|---|---|
| Midwest suburban | 6×12 in, 8 ft | $110 | $170 | $280 | Moderate labor costs |
| West Coast urban | 6×12 in, 8 ft | $150 | $230 | $360 | Higher delivery and permit costs |
| Northeast rural | 4×12 in, 6 ft | $70 | $100 | $180 | Lower trucking charges |
Real-world quote examples to anchor expectations
The following scenarios illustrate typical quotes a homeowner might receive. They include scope notes, labor hours, and per-unit pricing to help with benchmarking. Always verify local costs for your exact opening and load requirements.
- Scenario A: 6 ft, 4×12 in lintel, cast-in-place, Midwest suburb. Materials $60-$70, Labor $120-$180, Delivery $40, Total $260-$330.
- Scenario B: 8 ft, 6×12 in lintel, precast reinforced, West Coast city. Materials $150-$210, Labor $180-$260, Delivery $60-$100, Total $390-$570.
- Scenario C: 10 ft, 8×12 in lintel, steel-reinforced, Northeast rural. Materials $210-$260, Labor $260-$340, Delivery $80-$120, Total $550-$720.
Use the table to estimate budgets for multiple openings in a single project. The figures assume standard opening repairs with no major site complications. Quantities and delivery fees will change the total project price.
| Opening Size (ft) | Material Range | Installed Cost Range | Per-Lintel Notes |
|---|---|---|---|
| 6 | 4×12 in | $180-$260 | Cast-in-place or precast |
| 8 | 6×12 in | $260-$420 | Reinforced options |
| 10 | 8×12 in | $420-$680 | Higher load rating |