Cabinet Refacing Cost Per Door 2026

In the United States, cabinet refacing costs typically break down by door, frame prep, and finishing work. The price per door varies with material choice, door size, and hardware, and overall project totals depend on the number of doors and the condition of frames. This article focuses on cost factors, price ranges, and practical budgeting for a standard kitchen or bath cabinet facelift.

Item Low Average High Notes
Cabinet Refacing Per Door $100 $300 $650 Based on door size, material, and hardware quality
Total Project (10–20 doors) $1,500 $3,500 $9,000 Assumes standard 10–20 doors; excludes structural repairs
Per Door (Labor + Materials) $150 $350 $700 Includes frame prep and finish
Finishing & Hardware $50 $100 $200 Includes paint, stain, sealant, handles

Overview Of Costs

Cost ranges for cabinet refacing per door provide the simplest budgeting reference. The lowest end reflects basic materials and standard hardware, while the high end captures premium veneers, solid wood doors, and upgraded pulls. Typical projects involve frame prep, edge banding, new doors or doors re-faced to match existing frames, and a protective finish. Assumptions: region, door size, material quality, and labor hours.

Cost Breakdown

The following table summarizes how money generally allocates in a cabinet refacing project. The per-door approach assumes an average 30-36 inch tall door and standard 1/2 inch frame prep. data-formula=”labor_hours × hourly_rate”> A mid-range project often uses plywood-core doors with a thermofoil or wood veneer and updated hardware.

Category Low Average High Typical Drivers
Materials $40 $110 $250 Door material (thermofoil vs wood veneer), veneer quality
Labor $60 $150 $350 Work hours, crew size, job complexity
Hardware & Accessories $20 $60 $120 Hardware finish, soft-close hinges, pulls
Finishing $15 $40 $100 Clear coats, stain, sealant
Permits & Delivery $0 $15 $50 Local rules and travel costs
Waste Removal & Cleanup $5 $15 $40 Disposal fees, debris cleanup

What Drives Price

Material quality and door size are the top price drivers. Larger doors add more surface area to cover, while premium materials like solid wood or real veneer increase costs versus basic thermofoil. Additional drivers include cabinet count, frame condition, and finish type. A typical kitchen with 20 doors may require upgraded hinges or soft-close hardware, increasing per-door pricing by 15–40 percent compared with basic hardware.

Labor & Installation Time

Labor costs hinge on crew size and project duration. A standard refacing crew may comprise 2–3 installers working 1–2 days for 10–15 doors, with longer timelines for 20–30 doors or complex layouts. Labor usually accounts for nearly half of per-door cost in mid-range projects.

Regional Price Differences

Prices vary by market. In dense urban areas, per-door costs can be 10–20 percent higher due to labor demand and material sourcing, while rural markets may offer discounts but longer turnaround. Comparing three regions shows noticeable delta: Northeast urban centers, Midwest suburban markets, and Southern rural areas. Assumptions: region-based labor rate differences and material availability.

Real-World Pricing Examples

Three scenario cards illustrate typical outcomes. Each card lists specs, hours, per-door pricing, and totals to aid budgeting.

  • Basic — 8 doors, thermofoil doors, standard hardware, single finish; 16–20 hours; $110 per door; total $880–$2,200.
  • Mid-Range — 12 doors, wood veneer, upgraded pulls, two-coat finish; 22–28 hours; $250 per door; total $3,000–$6,000.
  • Premium — 20 doors, solid wood doors, premium veneer, soft-close hardware; 40–48 hours; $350–$450 per door; total $7,000–$9,000.

Ways To Save

Budget-friendly strategies include choosing standard door sizes, using stock hardware, and limiting finish coats to two. Bulk ordering materials for all doors often reduces per-door prices. Planning ahead to group doors by material and finish can reduce trips and labor downtime.

Regional Price Differences (Expanded)

To illustrate local effects, consider three example markets with approximate deltas: Urban Northeast (+15%), Suburban Midwest (+5%), and Rural Southeast (baseline). These deltas reflect higher labor rates and supply costs in cities versus lower costs in rural areas. Assumptions: market wage norms and material availability.

Cost By Region Snapshot

The following snapshot highlights where typical per-door pricing lands across regions.

Region Per-Door Range Project Range (8–20 doors) Notes
Urban Northeast $220–$650 $1,760–$13,000 Higher labor and material costs
Suburban Midwest $150–$420 $1,200–$8,400 Balanced pricing with standard materials
Rural South $110–$350 $880–$7,000 Generally lower costs, longer lead times

Similar Posts