Bosch Dishwasher Control Board Replacement Cost 2026
Homeowners typically pay for a Bosch control board replacement in a range that includes both parts and labor. The main cost drivers are part quality, model compatibility, and local labor rates. Cost estimates reflect a balance between OEM and aftermarket boards, plus service fees.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Control Board (Bosch OEM/Aftermarket) | $120 | $180 | $320 | Board compatibility varies by model |
| Labor for Diagnosis & Replacement | $70 | $110 | $180 | Typically 1–2 hours |
| Service Call or Trip Fee | $0 | $60 | $120 | If not bundled with labor |
| Tax & Permits | $0 | $15 | $40 | Depends on state |
| Delivery/Shipping (Parts) | $0 | $10 | $25 | Varies by supplier |
Assumptions: Bosch model, standard installation, mid-range part, within metropolitan area.
Overview Of Costs
Typical project range for a Bosch dishwasher control board replacement is $230-$520, with OEM parts often at the higher end. data-formula=”labor_hours × hourly_rate”> A basic diagnostic fee may be waived when the replacement is performed. Parts-only pricing commonly runs $120-$200 for common Bosch models, while higher-tier boards or specialty models can reach $320 or more.
Cost Breakdown
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $120 | $180 | $320 | Board, connectors, fasteners |
| Labor | $70 | $110 | $180 | Install and test |
| Permits / Permits Not Required | $0 | $0 | $0 | Not typically needed |
| Delivery/Disposal | $0 | $10 | $25 | Packaging and haul-away minor |
| Warranty / Recurring Costs | $0 | $0 | $0 | Most replacements include limited warranty |
What Drives Price
Key price factors include model compatibility (older versus newer Bosch dishwashers), board type (main control vs display module), and whether OEM parts are used. A material threshold for common models is typically 120–180 dollars for a board, while labor can add 70–180 dollars depending on accessibility. Regional labor rates can swing totals by roughly ±15% to ±25%.
Ways To Save
- Shop around for parts by checking BOSCH-approved retailers and reputable third-party suppliers.
- Bundle service fees with diagnosis and replacement when possible to reduce trip charges.
- Ask about warranty on the replacement board and labor to minimize future costs if failures recur.
Regional Price Differences
Prices vary by region due to labor markets and shipping times. In the Northeast, expect higher service call fees; the Midwest may show mid-range totals; the South often features lower labor rates. Typical delta ranges from −10% to +15% relative to the national average.
Labor, Hours & Rates
Labor time usually ranges from 1 to 2 hours for diagnosis and replacement, depending on access and dishwasher layout. Regional rates commonly fall between $85 and $140 per hour. Some technicians charge a flat diagnostic fee instead of hourly billing.
Additional & Hidden Costs
Hidden fees may occur if there are wiring harnesses, hinges, or control boards that require extra adapters. Extended warranty plans or expedited shipping for parts can add 20–40% to the total. Some models require a corrosive-tolerant connector set, increasing parts costs by $20–$60.
Real-World Pricing Examples
- Basic: Part only, no labor expected beyond standard installation window — Model X, standard board, 1.0–1.5 hours labor. Total: $180-$230; Parts: $120-$160; Labor: $60-$70.
- Mid-Range: OEM or equivalent board, standard service call, 1.5 hours labor. Total: $260-$360; Parts: $150-$200; Labor: $110-$140.
- Premium: High-end board with extended warranty, quicker turnaround, complex wiring. Total: $420-$520; Parts: $260-$320; Labor: $140-$200.
Assumptions: standard Bosch model, no additional repairs needed beyond the control board replacement.