Average Cost of Gutter Cleaning in the United States 2026
October 25, 2025
Homeowners typically pay a modest amount for gutter cleaning, with price driven by property size, roof configuration, and debris level. The cost is mostly influenced by home height, gutter length, accessibility, and whether extra work like downspout flushing or minor repairs is needed. Cost and price estimates are presented below to help set a budget for planning.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Gutter cleaning service | $120 | $190 | $390 | Typically for a standard two-story home with 125–200 ft of gutters |
| Per-foot pricing | $0.60 | $1.00 | $2.50 | Depends on height and access |
| Downspout flushing | $25 | $60 | $120 | Optional add-on if clogs persist |
| Minor repairs or resealing | $50 | $160 | $350 | Includes loose brackets or sealant |
| Roof or fascia cleanup | $0 | $60 | $180 | Only if debris near roof edge is heavy |
| Permits | $0 | $50 | $150 | Rare for routine cleaning |
Overview Of Costs
Average project ranges and per-unit ranges with assumptions show what a typical gutter cleaning job costs in the United States. For a standard two-story house with 125–200 ft of gutters, a mid-range job often falls around $180–$260, with lower-cost options near $120 and higher-end scenarios reaching $350 or more if access is difficult or if additional services are desired.
Assumptions: region, house height, gutter material, and debris level influence outcomes. Assumptions: region, specs, labor hours.
Cost Breakdown
The following table breaks down major price components and how they contribute to the total. Labor and accessibility drive most of the variability, while materials are typically minimal unless new brackets or seals are needed.
| Components | Typical Range | Per-Unit Basis | Assumptions | Notes |
|---|---|---|---|---|
| Materials | $0–$40 | $0–$0.25 per ft | Brackets, fasteners, sealant if needed | Usually minor in standard cleanings |
| Labor | $100–$250 | $1–$2 per ft | Height and difficulty affect hours | Primary cost driver |
| Equipment | $10–$40 | $0.08–$0.25 per ft | Ladders, hoses, blowers | Occasional rental if not on hand |
| Permits | $0–$50 | — | City or HOA requirements | Typically not needed for cleaning |
| Delivery/Disposal | $0–$25 | $0–$0.15 per ft | Disposal of debris | Often included in service fee |
| Warranty | $0–$20 | — | Limited workmanship guarantee | Usually optional |
| Taxes | $0–$20 | — | State and local rates apply | Varies by location |
What Drives Price
Height and access are the strongest cost factors, followed by the gutter length and debris load. Taller homes or multi-story layouts often require specialized equipment or extra time, adding to the bill.
Roof pitch matters: steep or difficult pitches add risk and time, which translates to higher labor rates. Debris type also matters; heavy pine needle buildup or stuck leaves may necessitate different cleaning methods or extra passes. data-formula=”labor_hours × hourly_rate”>
Ways To Save
Consolidating services or scheduling during off-peak seasons can yield savings. Bundling gutter cleaning with related services such as minor repairs or downspout flushing may reduce overall costs per item.
Homeowners can also improve cost predictability by requesting a written estimate that itemizes per-foot charges and any potential surcharges. Avoiding unnecessary add-ons keeps the budget focused on cleaning only.
Regional Price Differences
Prices vary by location due to labor markets and material costs. Three typical U.S. patterns are outlined here:
- Coastal metro areas: higher labor costs, typical ranges $180–$320 for mid-size homes
- Middle America suburbs: balanced pricing, typical ranges $150–$260
- Rural regions: lower costs, typical ranges $120–$210
Labor, Hours & Rates
Labor costs are often quoted as a per-hour rate or a per-foot charge. Common hourly rates run $60–$100 per hour, with crew size and accessibility affecting total hours. For a 150 ft gutter system, expect 1.5–3 hours of work in most cases.
Real-World Pricing Examples
Three scenario cards provide practical context for budgeting. Each scenario shows specs, hours, per-unit prices, and totals.
Basic: One-story home, 100–125 ft gutters, few obstacles. Specs: standard clean, debris removal, light vegetation. Hours: 1.0–1.5. Total: $120–$180. Assumptions: single-story, normal debris.
Mid-Range: Two-story, 140–190 ft gutters, moderate debris, optional downspout flush. Hours: 1.5–2.5. Total: $180–$260. Assumptions: average access, some complexity.
Premium: Taller home, 200+ ft gutters, dense debris, needs ladder assistance and minor repairs. Hours: 2.5–4.0. Total: $280–$390. Assumptions: steep pitch, difficult access.
Assumptions: region, specs, labor hours.