Aluminum Screen Door Price Guide: Costs, Ranges, and Budget Notes 2026
Buyers typically pay a range for aluminum screen doors based on size, frame style, screen mesh, hardware, and installation. The price has four main drivers: door size, system type (slotted hinge, self-closing, or sliding), mesh material, and labor. This article presents concrete price ranges in USD and practical ways to estimate a project budget for aluminum screen doors, including per-unit and per-square-foot considerations.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Aluminum screen door (basic, standard size) | $150 | $225 | $350 | Stock sizes 34×80 in. or 36×80 in. |
| Hardware and latchセット | $20 | $40 | $75 | Includes latch, hinges, screws |
| Screen material (fiberglass or aluminum mesh) | $15 | $25 | $50 | Fiberglass usually cheaper |
| Frame finish upgrade (powder coat) | $30 | $60 | $120 | Neutral or custom colors |
| Installation labor | $60 | $120 | $240 | Per door; residential area |
| Removal of old door | $20 | $50 | $100 | Dependent on accessibility |
| Delivery/haul-away | $0 | $20 | $60 | Local service charge |
| Permits or inspections | $0 | $0 | $100 | Regional requirement rare for simple doors |
Aluminum Screen Door Price by Size and Frame Width
The most impactful price driver is the door’s footprint. A standard 34×80 in. hinged aluminum screen door typically lands around $180-$260 for a base model. If a larger 36×80 in. frame is needed, expect prices in the $210-$320 range, inclusive of basic hardware. Narrow widths or French-style narrow sidelights can push costs higher. Assumptions: standard powder-coated aluminum frame, standard fiberglass screen, no custom colors.
Material and Component Breakdown for Aluminum Screens
Breaking out the components helps readers compare quotes. A typical install includes the door slab, hinges, latch, and screen. A basic setup may price as follows: door $150-$225, hardware $20-$40, screen mesh $15-$25, finish upgrade $0-$60. A mid-range upgrade to a frameless or dual-screed design adds $60-$120 for components and routing. Assumptions: standard mesh, mid-range powder coat.
Labor Time and Local Rates for Door Replacement
Labor is commonly priced as a pool of hours multiplied by hourly rates. For a single entry door, labor often falls in the $60-$120 per door range for basic installation, with regional premiums pushing it to $120-$240 in higher-cost areas. Total labor can be 1.0-2.5 hours for straightforward installs, or longer if adjustments are needed for frame alignment. Assumptions: standard single-story home, no custom carpentry, typical access.
System Type: Sliding vs Hinged Aluminum Screen Doors Costs
Sliding aluminum screen doors tend to cost less upfront than heavy hinged or double-door systems. A basic hinged door might cost $180-$260 before labor, while a sliding system can range $150-$230 for the door plus $60-$120 for installation. Higher-end sliding models with rollers and upgraded wheels can add $40-$80 more. Assumptions: standard track hardware, mid-range rollers, normal patio access.
Installation Extras That Change the Price
Extras such as weatherstripping, sill plates, or security pins influence the final quote. Weatherstripping adds roughly $10-$40, while a hard-wearing sill plate can cost $20-$60. If the installer performs frame trimming or deadbolt integration, add $40-$100 more. Assumptions: no structural remodeling, standard interior access.
Regional Price Variations in the U.S.
Prices vary by region due to labor markets and procurement costs. In the South or Midwest, a basic aluminum screen door installed might run $190-$280, whereas the West Coast or Northeast could yield $230-$360 including labor. Per-square-foot pricing can range $4-$9 per sq ft for complete installation in large homes. Assumptions: urban versus suburban differences apply, standard material quality.
Replacement vs Repair: When to Requote
If the door frame is warped or surrounding trim is damaged, quotes can shift. Repair-only scenarios (simple hinge adjustment, screen patch) may stay near $60-$120 for labor, while full replacement escalates to $250-$520 including door, mesh, and hardware. For older homes with unusual frame sizes, expect a broader range. Assumptions: no major framing remediation.
Seasonal Price Fluctuations and Scheduling Effects
Demand shifts through seasons. Spring and early summer often see slightly higher quotes due to busy schedules, while late fall may offer modest discounts or promotions. Expect price shifts of ±10% around the standard ranges when scheduling near peak seasons. Assumptions: typical contractor availability, no urgent emergency work.
Cost Components in a Typical Aluminum Screen Door Quote
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Door slab (standard 34×80, aluminum) | $150 | $210 | $260 | Flat or raised panel options |
| Hardware and latch | $20 | $35 | $70 | Hinges, mounting screws |
| Screen mesh | $15 | $25 | $50 | Fiberglass or aluminum mesh |
| Finish / customization | $0 | $40 | $100 | Powder coat color upgrade |
| Labor for installation | $60 | $120 | $240 | Per door; region dependent |
| Removal of old door | $20 | $40 | $90 | Access-dependent |
| Delivery/haul-away | $0 | $15 | $40 | Local labor charge |
| Permits | $0 | $0 | $100 | Regional requirement |
Tip: When evaluating quotes, request line-item pricing for door, mesh, finish, hardware, and labor to easily compare total costs. Understanding whether a quote uses per-unit or per-door pricing helps prevent surprises at install day.