3/4 Crushed Stone Price Guide for U.S. Buyers 2026

Prices for 3/4 crushed stone vary by size of the project, location, and delivery requirements. The cost range reflects material price, haulage, and common service fees, with the keyword 3/4 crushed stone price appearing in practical budgeting terms.

Introduction note: Buyers typically pay by ton or by cubic yard, with per-unit pricing plus delivery charges that depend on distance and access. The following figures assume standard clean 3/4″ limestone or granite, accessible delivery, and normal compaction for common driveway or drainage projects.

Item	Low	Average	High	Notes
3/4″ Crushed Stone (per ton)	$14	$20	$25	Includes material cost; regional variance
3/4″ Crushed Stone (per cubic yard)	$22	$32	$40	Typically ~1.4 tons per yd³
Delivery Fee (local, within 20 miles)	$40	$60	$90	Distance-based pricing
Delivery Fee (longer distance)	$60	$120	$180	Heavy loads add cost
Minimum Order or Service Charge	$50	$75	$120	May apply for small orders

Material Costs by Unit and Typical Project Scope

3/4″ crushed stone price is most often quoted per ton or per cubic yard. For a compacted driveway or drainage trench, buyers commonly estimate 1.4 tons per cubic yard. This block shows representative ranges to help buyers budget for a typical project, such as a 10-by-20-foot driveway or a 100-square-foot drainage trench.

Unit	Low	Average	High	Assumptions
Per ton	$14	$20	$25	Includes material, typical regional mix
Per cubic yard	$22	$32	$40	Assumes ~1.4 tons/yd³
Trip or delivery charge	$40	$60	$90	Within 20 miles

Key Cost Drivers That Change the Final Price

Distance to site is a major driver; longer trips increase delivery and fuel surcharges. Assumptions: Midwest or Southern markets, standard limestone or granite, normal access.

Quantity and compaction needs affect per-yard pricing; larger volumes may receive bulk discounts, while compacted layers can require more material than initial estimates. Assumptions: Driveway or trench application, minimal regrading.

Cost Breakdown by Quote Component

The following table lays out typical quote components for 3/4 crushed stone projects, highlighting where price varies most.

Component	Low	Average	High	Notes
Materials	$14/ton	$20/ton	$25/ton	Material type and region
Delivery	$40	$60	$90	Distance-based
Labor (placement)	$0	$0	$0	Assumes self-placement or simple spreading
Taxes/Permits	$0	$0	$20	State/local variations
Miscellaneous	$5	$15	$25	Fuel surcharges, access fees

Variables That Drive the Final Quote: System Size and Access

Thickness and area multiply the stone quantity: a 10-foot by 20-foot driveway at 4 inches thick needs more material than a 100-square-foot trench. Minimum crew and material loading time can shift totals by 10–25% depending on site access.

Assumptions: Subgrade ready, no heavy grading, standard 3/4″ stone, typical residential access.

Ways to Trim Costs Without Sacrificing Quality

Bundle delivery with other projects to secure a better haul rate. Consider using the stone for a single larger area rather than multiple smaller deliveries. Assumptions: No special color or washed stone required.

Ask for bulk discounts, verify minimums, and compare quotes from within the same region to avoid cross-market price swings.

Regional Price Variations You Should Expect

Prices show modest regional differences; coastal markets can carry higher delivery fees, while inland regions may have lower per-ton rates. Plan for a 5–15% delta between neighboring counties with similar substrate.

Practical Example Scenarios and Estimates

Scenario A: 10-by-20-foot driveway at 4 inches thick; material only, no special compaction. Estimate: 8.3 tons, $120–$210 material, plus delivery $40–$90.

Scenario B: 100-square-foot drainage trench; shallow fill, compacted. Estimate: 2.5 tons, $35–$64 material, delivery $40–$60.

Per-Unit Cost Summary for Quick Budgeting

To help buyers compare bids, here is a compact per-unit snapshot: 3/4″ crushed stone typically costs $14-$25 per ton or $22-$40 per cubic yard, excluding delivery.