5/8 Plywood Price: Cost Ranges for Common Projects 2026
Prices for 5/8 inch plywood vary by grade, sheet size, and region. This article shows exact price ranges and typical costs buyers should expect when budgeting for 5/8 plywood for subflooring, sheathing, or cabinetry. The keyword cost is discussed in practical terms to help readers plan confidently.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 5/8″ Plywood per 4′ x 8′ sheet (CDX) | $20 | $35 | $60 | Common exterior grade |
| 5/8″ Plywood per 4′ x 8′ sheet (Birch/MP) | $25 | $40 | $70 | Interior finishing grades |
| Delivery surcharge | $0 | $15 | $50 | Depends on distance |
| Cutting/planing service | $5 | $15 | $40 | Per sheet or order |
| Warranty/Manufacturer defect coverage | $0 | $5 | $15 | Typically included or optional |
What buyers usually pay for 5/8 Plywood by type and sheet size
Typical total price for a standard 4′ x 8′ sheet of 5/8″ CDX exterior plywood is $20-$60, with higher grades and premium finishes pushing toward the top end. The average range reflects common regional variations and stock availability. Expect higher costs in remote regions or during peak construction seasons. A typical project might require several sheets, plus minor edge trimming and handling.
Cost components that make up a plywood project quote
Major cost drivers include materials, labor, and delivery. The breakdown below highlights four core parts of the quote, with a compact table for quick planning.
| Component | Typical Range | Notes | Per-Sheet Basis |
|---|---|---|---|
| Materials | $20-$70 | Grade and type vary | $20-$70 |
| Labor (cutting/installation) | $2-$8 | Per sheet, indoor use | $2-$8 |
| Delivery | $0-$50 | Distance dependent | $0-$50 |
| Waste/Disposal | $0-$10 | Scrap handling | $0-$10 |
| Edge finishing/fasteners | $1-$5 | Glue, nails, screws | $1-$5 |
Variables that most influence the final 5/8 Plywood quote
Regional supply, grade choice, and sheet quantity are the top quote shapers. Price can swing by up to 30-40% based on region and current lumber market conditions. A 4′ x 8′ sheet of exterior CDX can cost more in the West Coast during a storm season than in the Midwest during a lull.
Regional price differences you should expect
Coastal markets often show higher base prices than interior markets due to shipping and demand. In practice, a 4′ x 8′ sheet may range from $22-$60 in different regions, while bulk purchases or local mill direct buys can push costs down. Regional discounts, delivery windows, and truck access can change final numbers.
Labor considerations when estimating installation of 5/8 plywood
Labor hours per sheet are a key variable that affects total cost. Fast installers may cost more per hour but finish fewer sheets per day, while economical crews can reduce per-sheet labor with higher throughput. Typical indoor installation rates range from 0.5 to 2 hours per sheet depending on prep work and fastener type.
Choosing between exterior CDX and interior birch for structural uses
Structural plywood choices impact both price and performance. Exterior CDX costs roughly 15-40% more than interior birch for similar thickness and size, but offers moisture resistance needed for subfloors or exterior sheathing. For interior cabinet-grade uses, birch or MP-grade plywood may save money with comparable finish expectations.
Size, grade, and finish: how they drive price per sheet
Sheet grade and finish level determine the per-sheet price more than size alone. A 4′ x 8′ sheet in a premium interior grade may cost well above a basic exterior CDX, while the same thickness in a lower grade could be cheaper but less suitable for visible surfaces. Expect price ladders by grade category rather than a flat one-price model.
Add-ons and services that commonly affect the final bill
Edge sealing, moisture barriers, and edge banding add modest costs. Include fasteners, glue, moisture sealant, and potential trim work when budgeting. Some vendors quote a flat processing fee for combined orders that include multiple plywood types.
Ways to trim costs without compromising structural needs
Control scope and plan ahead for punctual material pickup. Buy only needed sheets, avoid over-purchase, compare mill-direct pricing when possible, and schedule delivery to minimize idle time. Bundling materials for a single job can unlock small discounts and reduce waste.
Two real-world quote snapshots for 5/8 plywood projects
Quote A: Subfloor retrofit in a 2,000 sq ft home used exterior CDX at 4′ x 8′ sheets, 1,000 linear feet of edges sealed. Estimated total: $2,800-$4,200, or $2.80-$4.20 per sq ft including labor. Quote B: Interior cabinetry-grade 5/8″ birch sheets for a 1200 sq ft kitchen remodel, 20 sheets, with delivery and planing.
| Project | Sheet Type | Sheets | Labor Hours | Total Range |
|---|---|---|---|---|
| Subfloor retrofit | CDX Exterior | 25 | 14-20 | $2,800-$4,200 |
| Cabinet-grade panels | Birch Interior | 20 | 6-10 | $1,600-$3,000 |
Assumptions: Midwest labor rates, standard 4′ x 8′ sheets, typical moisture conditions, and normal access.