3/4 Rebar Price: Typical Costs, Per-Foot Rates, and Regional Variations 2026
Buyers ask for the cost of 3/4 inch rebar to budget projects ranging from small repairs to larger foundations. The price is driven by steel market fluctuations, length purchased, coating, and supplier location. This article presents concrete cost ranges and per-foot estimates to help plan a budget for 3/4 rebar purchases in the United States.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 3/4″ plain rebar per foot | $0.60 | $0.85 | $1.15 | U.S. market, base steel price |
| 3/4″ rebar with epoxy coating per foot | $1.40 | $1.80 | $2.40 | Corrosion resistance for exposure |
| 3/4″ rebar bundles (5,000 ft) per ton equivalent | $1,000 | $1,300 | $1,650 | Bulk pricing varies by supplier |
| Delivery fee (regional) | $50 | $180 | $400 | Distance and fuel costs apply |
| Rebar couplers or stirrups per unit | $0.25 | $0.60 | $1.00 | Optional accessories |
Current 3/4 Rebar Price Per Foot in the U.S.
Typical ranges vary by coating, market timing, and regional supply. In most markets, plain 3/4″ rebar trades around $0.70 to $0.95 per foot, with epoxy-coated variants rising to $1.50-$2.00 per foot for exposure-prone applications. Assumptions: standard fabrication, Midwest-to-South freight, ordinary bulk supply, normal access to stock. Prices reflect current steel futures and regional milling costs, not fixed national rates.
What Drives the Cost of 3/4 Rebar
Three main factors set the price: base material steel, coating, and delivery. Base steel price responds to global supply chains, Epoxy coating adds protection costs, and delivery depends on distance and access at the job site. Common price ranges account for these variables to help buyers estimate both per-foot and per-ton equivalents.
Cost Breakdown: Major Components of a 3/4 Rebar Quote
The quote often splits into Materials, Delivery, and Accessories. Materials cover the steel bars themselves, including any coating. Delivery accounts for fuel, labor to unload, and possible lift equipment. Accessories include couplers, bend bars, and stirrups used to tie the assembly together.
| Component | Typical Cost | Notes |
|---|---|---|
| Materials (3/4″ plain rebar, per foot) | $0.60-$0.95 | Stock length 20 ft to 60 ft commonly cut |
| Coating (epoxy per foot) | $0.70-$1.45 | Applied to exposed or corrosive environments |
| Delivery/Truck Freight | $50-$180 | Depends on distance and access |
| Labor for offloading | $0.10-$0.40/ft | Site-ready at pickup |
| Couplers/Stirrups | $0.25-$1.00 per unit | Needed for connections |
Variables That Strongly Change Final 3/4 Rebar Quotes
Two numeric thresholds commonly shift pricing: (1) project scale measured in total linear feet or tons, and (2) coating requirement such as epoxy or galvanization. For example, larger jobs (>5,000 ft of 3/4″ rebar) typically unlock bulk discounts, while epoxy coatings can raise per-foot costs by 60% to 100% versus plain bar. Site access and lead time also affect price, with rush orders incurring premium fees.
Regional Differences That Send Prices Up or Down
Coast-to-coast and metro-to-rural markets show spread in base rates. In the Northeast and West Coast, expect higher base steel and delivery costs than the Midwest or Southeast. Buyers should request region-specific quotes and check for local tax impacts. Regional freight proximity can shave or add cents per foot.
Size and Type Details That Change Per-Foot Costs
Size and type drive a big share of the total. A 3/4″ plain bar is cheaper than epoxy-coated or galvanneal variants. Coated bars cost roughly 1.5x to 2x the plain price. For a typical residential footing, plan with 1500–3000 ft of 3/4″ rebar, which translates to modest bulk savings. Coating type and length of run are the key cost levers.
Per-Unit Pricing for Common Install Scenarios
Scenario examples help compare bids. A small concrete pad might require 75–150 ft of 3/4″ rebar, plain, with minor accessories, delivering in the $60–$140 range for materials plus delivery. A large footing project could use 5,000 ft of plain rebar with bulk pricing, around $3,600–$4,750 including delivery. Per-foot estimates vary with length and coating.
How Epoxy Coating Affects Total Cost
Epoxy-coated 3/4″ rebar adds corrosion resistance for outdoor or pool environments. Expect per-foot costs to rise about $0.80 to $1.50 above plain bar, depending on coating thickness and supplier. For a 2,000 ft job, that can swing total by $1,600 to $3,000 more in materials alone. Coating adds long-term value by reducing repair costs.
Delivery, Handling, and On-Site Prep Fees
Delivery charges are commonly $50–$180 depending on distance, while unloading labor can add $0.10–$0.40 per foot. If the site needs special equipment or permits for heavy-haul loads, expect additional charges. Buyers should confirm access restrictions and delivery windows in the contract. Clear delivery terms help avoid surprise fees.
Comparing 3/4 Rebar Accessories and Bundling Options
Bags of stirrups, couplers, and bent bars may be sold separately or included in a bundle. Bundling discounts can shave a few cents per foot, especially on larger projects. When possible, choose a supplier offering a complete kit with straightening, cutting, and counting services. Bundle pricing reduces per-foot cost.
Practical Ways to Reduce 3/4 Rebar Costs Without Compromising Quality
Control scope to avoid over-purchasing, time deliveries to non-peak hours, and compare multiple quotes for similar specs. Substitute plain 3/4″ rebar for epoxy-coated only where corrosion risk is low, and align length needs to minimize waste. If replacement is possible, use longer bars to reduce joints and labor. Strategic material choices cut total project cost.