10 Ft Granite Countertop Price Guide for U.S. Kitchens 2026
Typical costs for a 10-foot granite countertop vary by slab size, edge profile, installation labor, and regional pricing. This guide breaks down the price to help buyers estimate the total cost for a standard 10-foot run, including materials, fabrication, and service charges. The keyword cost is addressed throughout with practical ranges you can expect when budgeting for granite countertops.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Material (granite slab, 10 ft run) | $1,200 | $2,000 | $3,000 | Assumes standard 3 cm thickness, one slab, typical color |
| Fabrication & edge profile | $600 | $1,000 | $2,000 | Includes cutting, polishing, basic edge |
| Labor (installation) | $600 | $1,000 | $2,000 | Professional crew, one-day install |
| Fabrication waste & templating | $100 | $250 | $500 | Measurement, templating adjustments |
| Delivery & handling | $50 | $150 | $350 | Regional variations |
| Sealing & maintenance | $40 | $100 | $200 | Initial seal and care guidance |
Material costs for a 10-foot granite run by slab quality
Granite price per square foot typically ranges from $30 to $60, depending on color, veining, and origin. A straight 10-foot run (roughly 25 inches deep) spans about 3.0 to 3.5 square feet of surface area per linear foot, so a 10-foot length often uses 25–40 square feet of countertop. Assumptions: standard 3 cm thickness, single symmetric slab, common color group.
Edge profiles and their impact on total cost
Edge profiles add both beauty and price. A simple eased edge might add $20–$40 per linear foot, while a full ogee or waterfall edge can push the cost higher. For a 10-foot run, expect an extra $200–$800 depending on profile chosen and fabrication complexity. Assumptions: standard installation with single profile on all edges.
Labor and installation time for a 10 ft granite countertop
Labor typically accounts for about $1,000 on average for a 10-foot install, including templating, cutting, fitting, and securing. In markets with higher wages, labor may reach $2,000, while less expensive regions may fall near $600. Estimated crew time is 6–10 hours depending on sink cutouts and edge work. Assumptions: single base cabinet run, under-mount sink, standard plumbing considerations.
Templates, fabrication waste, and added charges
Templating and waste handling can add $150–$350 to the project. A precise template reduces later adjustments that increase cost. Budget for minor reshaping or seam refinements if two slabs are used or if corner radii are required. Assumptions: standard kitchen layout, one seam, no unusual cuts.
Delivery, handling, and on-site logistics by region
Delivery fees vary widely. In many U.S. markets, delivery ranges from $50–$200, with remote or crowded urban areas pushing toward $300. Some installers include delivery in the base price; others itemize it separately. Assumptions: standard curbside delivery, staircase access, no crane needed.
Sealing, maintenance, and long-term upkeep costs
Initial sealing is often included, with resealing every 1–3 years depending on usage. A maintenance plan can cost $60–$150 upfront and $0–$60 per reseal periodically. Assumptions: daily kitchen use, no acidic exposure beyond typical cooking.
Region and market differences that move the price needle
Prices differ by labor rates and material sourcing. Regions with high-cost-of-living or strong artisan demand may see granite prices toward the upper end of the range, while more rural areas may sit near the lower end. Expect regional deltas of 10–40% from the base estimates. Assumptions: standard 10-foot run, typical color options.
Color, grade, and slab availability affecting the quote
Premium granites with unique veining or rare origins can increase cost by 15–40% over standard options. Grade A or premium pigment patterns often drive higher prices even for identical square footage. Assumptions: one or two seam options, no exotic materials.
Alternatives to consider that alter the price trajectory
If the budget is tight, consider quartz or solid-surface alternatives or plan a partial upgrade with a durable edge. A quartz 10-foot run may land in a similar ballpark but could offer different maintenance costs. Weigh replacement versus repair for existing counters when evaluating bids. Assumptions: mid-range materials, standard sink and cooktop configurations.
Cost components in a formal quote for a 10-ft granite run
The core quote splits into major parts. A compact view helps compare bids accurately. Materials, Labor, Delivery/Handling, Fabrication, and Sealing are the primary drivers.
| Quote Component | Typical Range | Per-Unit Basis | Notes |
|---|---|---|---|
| Granite slab material | $1,200–$3,000 | $30–$60 per sq ft | Depends on color and origin |
| Fabrication and edge | $600–$2,000 | flat rate or per ft | Profile and seams affect the total |
| Labor and installation | $600–$2,000 | per job | Includes templating and securing |
| Delivery/Handling | $50–$350 | per job | Regional variation applies |
| Sealing and maintenance | $40–$200 | $0–$60 per reseal | First seal usually included |
| Waste & templating | $100–$350 | per job | Templates reduce on-site rework |
Assumptions: Midwest labor rates, standard 3 cm granite, one or two seams, standard under-mount sink, typical corner configurations.